Datasheet4U Logo Datasheet4U.com

MK1714-02 - Spread Spectrum Multiplier Clock

General Description

The MK1714-02 is a low cost, high performance clock synthesizer with selectable multipliers and percentages of spread designed to generate high frequency clocks with low EMI.

Key Features

  • Packaged in 20-pin tiny SSOP.
  • Pb (lead) free package.
  • Operating voltage of 3.3 V or 5 V.
  • Multiplier modes of x1, x2, x3, x4, x5, and x6.
  • Inexpensive 10 - 25 MHz crystal or clock input.
  • OE pin tri-states the outputs for board testing.
  • Power down pin stops the outputs low.
  • Selectable frequency spread.
  • Spread can be turned on or off.
  • Advanced, low power CMOS process.
  • Duty cycle of 40/60.
  • Ind.

📥 Download Datasheet

Datasheet Details

Part number MK1714-02
Manufacturer Renesas
File Size 345.80 KB
Description Spread Spectrum Multiplier Clock
Datasheet download datasheet MK1714-02 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MK1714-02 Spread Spectrum Multiplier Clock Integrated Circuit Systems
MK1711-01 200 MHz Selectable Clock Source Integrated Circuit Systems
MK1704A Low EMI Clock Generator Integrated Circuit Systems
MK1707 Low EMI Clock Generator Integrated Circuit Systems
MK1709 Low EMI Clock Generator Integrated Circuit Systems

Other Datasheets by Renesas

Part Number Description
MK1716-01 SERIAL PROGRAMMABLE PCI SS VERSACLOCK SYNTHESIZER
MK1704A LOW EMI CLOCK GENERATOR
MK1705A ATI LOW EMI CLOCK GENERATOR
MK1707 LOW EMI CLOCK GENERATOR
MK1709 LOW EMI CLOCK GENERATOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SPREAD SPECTRUM MULTIPLIER CLOCK DATASHEET MK1714-02 Description The MK1714-02 is a low cost, high performance clock synthesizer with selectable multipliers and percentages of spread designed to generate high frequency clocks with low EMI. Using analog/digital Phase Locked Loop (PLL) techniques, the device accepts an inexpensive, fundamental mode, parallel resonant crystal or clock input to produce a spread or dithered output. This reduces the EMI amplitude peaks at the odd harmonics by several dB. The OE pin puts both outputs into a high impedance state for board level testing. The PD pin powers down the entire chip and the outputs are held low. Features • Packaged in 20-pin tiny SSOP • Pb (lead) free package • Operating voltage of 3.