SH7269 - Boot From the Serial Flash Memory Using SPI Multi I/O Bus Controller
Renesas
General Description
Boots the MCU from serial flash memory connected to Renesas Serial Peripheral Interface channel 0
In boot mode 3, an internal ROM program to boot transfers the loader program from the serial flash memory connected to Renesas Serial Peripheral Interface channel 0 (RSPI0) to the high-speed internal R
Full PDF Text Transcription for SH7269 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
SH7269. For precise diagrams, and layout, please refer to the original PDF.
APPLICATION NOTE SH7268/SH7269 Group Boot From the Serial Flash Memory Using SPI Multi I/O Bus Controller Summary R01AN0663EJ0101 Rev. 1.01 Feb 16, 2012 SH7268/SH7269 SPI...
View more extracted text
oller Summary R01AN0663EJ0101 Rev. 1.01 Feb 16, 2012 SH7268/SH7269 SPI multi I/O bus controller (SPIBSC) has the function to directly fetch the program data on a serial flash memory and execute them (external address space read mode). This application note offers explanations Target Device SH7268/SH7269 MCU (In this document, SH7268/SH7269 are described as "SH7269".) When using this application note with other Renesas MCUs, careful evaluation is recommended after making modifications to comply with the alternate MCU. Contents 1. 2. 3. 4. 5. 6. Introduction....................................................................
SH7269 Datasheet
