UPD166031AT1U Datasheet | Renesas

Overview 1.1 Description Family: PD166031AT1U is part of 2nd Generation Intelligent Power Devices (IPD). They are N-channel high-side switches with charge pump, voltage controlled input, diagnostic feedback with proportional load current sense and embedded protection function. Family includes up to 14 devices depending on on-state resistance, package and channel number bination. Scalability: Variety of on-state resistance bined with standardized package on pin-out give user high flexibility for unit design depending on target load. Robustness: Because of advanced protection method, 2nd Generation Intelligent Power Devices achieve high robustness against long term and repetitive short circuit condition. 1.2 Features - Built-in charge pump - 3.3V patible logic interface - Low standby current - Short circuit protection  Shutdown by over current detection  Power limitation protection by over load detection (Power limitation: current limitation with delta Tch control)  Absolute Tch over temperature protection - Built-in diagnostic function  Proportional load current sensing  Defined fault signal in case of abnormal load condition - Loss of ground protection - Under voltage lock out - Active clamp operation at inductive load switch off - Cross current protection in case of H-bridge high side usage - AEC Qualified - Ro HS pliant 1.3 Application - Light bulb switching from 55W to 65W according to on-state resistance - Switching of all types of 14V DC grounded loads, such as LED, inductor, resistor and capacitor - Power supply switch, fail-safe switch of 14V DC grounded system Note: The information contained in this document is the one that was obtained when the document was issued, and may be subject to change. R07DS1308EJ0100 Rev.1.00 Oct. 30, 2015 Page 1 of 39 PD166031AT1U 2. Ordering Information 2. Ordering Information Part No. Nick name Lead plating Packing UPD166031AT1U-E1-AY NHS010A(A) Pure Matte Sn Tape 2500 p/reel Note: Part No. and Nick name...