Datasheet4U Logo Datasheet4U.com

UPD5713TK - WIDE BAND SPDT SWITCH

Description

for mobile communications, wireless communications and another general-purpose RF switching application.

Features

  • Supply voltage : VDD = 1.8 to 3.6 V (2.8 V TYP. ).
  • Switch control voltage : Vcont (H) = 1.8 to 3.6 V (2.8 V TYP. ) : Vcont (L) =.
  • 0.2 to +0.4 V (0 V TYP. ).
  • Low insertion loss : Lins1 = 0.6 dB TYP. @ f = 0.05 to 1.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V : Lins2 = 0.8 dB TYP. @ f = 1.0 to 2.0 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V : Lins3 = 0.95 dB TYP. @ f = 2.0 to 2.5 GHz, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V.

📥 Download Datasheet

Datasheet preview – UPD5713TK

Datasheet Details

Part number UPD5713TK
Manufacturer Renesas Electronics
File Size 221.80 KB
Description WIDE BAND SPDT SWITCH
Datasheet download datasheet UPD5713TK Datasheet
Additional preview pages of the UPD5713TK datasheet.

📁 Similar Datasheet

  • UPD5713TK - WIDE BAND SPDT SWITCH (CEL)
  • UPD5710TK - SINGLE CONTROL CMOS SPDT SWITCH (CEL)
  • UPD5710TK - WIDE BAND SPDT SWITCH (NEC)
  • UPD5715GR - CMOS MMIC 4 x 2 IF SWITCH MATRIX (NEC)
  • UPD5716GR - CMOS MMIC 4 x 2 IF SWITCH MATRIX (NEC)
  • UPD5702TU - Si LD MOS POWER AMPLIFIER (CEL)
  • UPD5702TU - 3V OPERATION SILICON LDMOSFET RF POWER AMPLIFIER INTEGRATED CIRCUIT (NEC)
  • UPD5738T6N - WIDE BAND DPDT SWITCH (NEC)
  • UPD5747T6J - LOW NOISE AND HIGH GAIN AMPLIFIER (NEC)
  • UPD50HC-033 - NMOS Printer Controller (ETC)
Other Datasheets by Renesas

Full PDF Text Transcription

Click to expand full text
DATA SHEET CMOS INTEGRATED CIRCUIT μPD5713TK WIDE BAND SPDT SWITCH DESCRIPTION The μPD5713TK is a CMOS MMIC for wide band SPDT (Single Pole Double Throw) switch which were developed for mobile communications, wireless communications and another general-purpose RF switching application. This device can operate frequency from 0.05 to 2.5 GHz, having the low insertion loss and high isolation. This device is housed in a 6-pin lead-less minimold (1511) package. And this package is able to high-density surface mounting. FEATURES • Supply voltage : VDD = 1.8 to 3.6 V (2.8 V TYP.) • Switch control voltage : Vcont (H) = 1.8 to 3.6 V (2.8 V TYP.) : Vcont (L) = −0.2 to +0.4 V (0 V TYP.) • Low insertion loss : Lins1 = 0.6 dB TYP. @ f = 0.05 to 1.0 GHz, VDD = 2.8 V, Vcont (H) = 2.
Published: |