X9C102 - Digitally Controlled Potentiometer

Product Overview

Renesas

Datasheet Details

Part number	X9C102
Manufacturer	Renesas
File Size	614.88 KB
Description	Digitally Controlled Potentiometer
Datasheet	X9C102 Datasheet
Additional preview pages of the X9C102 datasheet.

Product details

Description

PIN NUMBER 1 2 3 4 5 6 7 8 PIN NAME INC U/D VH/RH VSS VW/RW RL/VL CS VCC DESCRIPTION INCREMENT The INC input is negative-edge triggered.Toggling INC will move the wiper and either increment or decrement the counter in the direction indicated by the logic level on the U/D input.UP/DOWN The U/D input controls the direction of the wiper movement and whether the counter is incremented or decremented.VH/RH The high (VH/RH) terminals of the X9C102, X9C103, X9C104, X9C503 are equivalent to the f

Features

Solid-State Potentiometer.
Three-Wire Serial Interface.
100 Wiper Tap Points - Wiper Position Stored in Non-volatile Memory and Recalled on Power-up.
99 Resistive Elements - Temperature Compensated - End-to-End Resistance, ±20% - Terminal Voltages, ±5V.
Low Power CMOS - VCC = 5V - Active Current, 3mA max. - Standby Current, 750µA max.
High Reliability - Endurance, 100,000 Data Changes per Bit - Register Data Retention, 100 years.
X.

📁 Similar Datasheet

X9C102 - Digitally Controlled Potentiometer (Intersil)
X9C103 - Digitally Controlled Potentiometer (Intersil)
X9C104 - Digitally Controlled Potentiometer (Intersil)
X9C303 - Digitally Controlled Potentiometer (Xicor)
X9C303 - Logarithmic Digitally Controlled Potentiometer (Intersil Corporation)
X9C503 - Digitally Controlled Potentiometer (Intersil)

Other Datasheets by Renesas

X9C102P - Digitally Controlled Potentiometer
X9C103 - Digitally Controlled Potentiometer
X9C103P - Digitally Controlled Potentiometer
X9C104 - Digitally Controlled Potentiometer
X9C104P - Digitally Controlled Potentiometer
X9C503 - Digitally Controlled Potentiometer

Published: Jan 28, 2019 |