900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Renesas Electronics Components Datasheet

ZSSC3027 Datasheet

16-Bit Sensor Signal Conditioner

No Preview Available !

Low-Power, High-Resolution
16-Bit Sensor Signal Conditioner
ZSSC3027
Datasheet
Brief Description
The ZSSC3027 is a sensor signal conditioner (SSC)
integrated circuit for high-accuracy amplification and
analog-to-digital conversion of a differential input
signal. Designed for high-resolution altimeter module
applications, the ZSSC3027 can perform offset,
span, and 1st and 2nd order temperature compen-
sation of the measured signal. Developed for correc-
tion of resistive bridge sensors, it can also provide a
corrected temperature output measured with an
internal sensor.
The measured and corrected bridge values are
provided at the digital output pins, which can be
configured as I2C™* (3.4MHz) or SPI (20MHz).
Digital compensation of signal offset, sensitivity,
temperature, and non-linearity is accomplished via
an 18-bit internal digital signal processor (DSP) run-
ning a correction algorithm. Calibration coefficients
are stored on-chip in a highly reliable, non-volatile,
multiple-time programmable (MTP) memory. Pro-
gramming the ZSSC3027 is simple via the serial
interface. The IC-internal charge pump provides the
MTP programming voltage. The interface is used for
the PC-controlled calibration procedure, which pro-
grams the set of calibration coefficients in memory.
The ZSSC3027 provides accelerated signal process-
ing in order to support high-speed control, safety,
and real-time sensing applications. It complements
IDT’s ZSSC30x6 products.
Features
Flexible, programmable analog front-end design;
up to 16-bit scalable, charge-balancing two-
segment analog-to-digital converter (ADC)
Fully programmable gain amplifier accepting
sensors from 14 to 72 (linear factor)
Internal auto-compensated temperature sensor
Digital compensation of individual sensor offset;
1st and 2nd order digital compensation of sensor
gain as well as of 1st and 2nd order temperature
gain and offset drift
Layout optimized for stacked-die bonding for
high-density chip-on-board assembly
Typical sensor elements can achieve accuracy of
better than ±0.10% FSO** @ -40 to 85°C
Benefits
Integrated 18-bit calibration math DSP
Fully corrected signal at digital output
One-pass calibration minimizes calibration costs
No external trimming, filter, or buffering com-
ponents required
Highly integrated CMOS design
Excellent for low-voltage and low-power battery
applications
Optimized for operation in calibrated resistive
sensor modules
Physical Characteristics
Supply voltage range: 1.7 to 3.6V
Operating mode current consumption:
930µA (typical)
Sleep State current: 20nA (typical)
Temperature resolution: <0.003K/LSB
Operation temperatures: –40°C to +85°C
Small die size
Delivery options: die for wafer bonding
Available Support
ZSSC3026 Evaluation Kit can be used to
evaluate ZSSC3027 capabilities
Support Documentation
ZSSC3027 Application Example
* I2C™ is a trademark of NXP.
** FSO = Full Scale Output.
© 2016 Integrated Device Technology, Inc.
1
April 20, 2016


Renesas Electronics Components Datasheet

ZSSC3027 Datasheet

16-Bit Sensor Signal Conditioner

No Preview Available !

Low-Power, High-Resolution
16-Bit Sensor Signal Conditioner
ZSSC3027
Datasheet
ZSSC3027
Block Diagram
VDDB
VTP Temperature
Reference
VTN Sensor
Sensor
Bridge
Applications
Barometric altitude measurement for
portable navigation or emergency call
systems
Altitude measurement for car navigation
Inside hard disk pressure measurement
Weather forecast
Fan control
Industrial, pneumatic, and liquid pressure
High-resolution temperature measurements
INP
INN
VSSB
Power-ON
Reset
AGND / CM
Generator
Vreg int
Bias Current
Generator
Voltage
Regulator
Power Ctr.
ZSSC3027
VDD
VSS
Pre-
Amplifier
Clock
Generator Ring
Oscillator
A
D
16 Bit
System
Control
Unit
18-bit DSP Core
(Calculations,
Communication)
EOC
MTP
ROM
SPI
I²CTM
SCLK/SCL
SS
MOSI/SDA
MISO
SEL
Ordering Information (See section 6 in the data sheet for additional options for delivery)
Sales Code
ZSSC3027AC1B
ZSSC3027AC6B
ZSSC3027AC7B
ZSSC3026-KIT
Description
Delivery Package
Die—temperature range: –40°C to +85 °C
Wafer (304µm) unsawn, tested
Die—temperature range: –40°C to +85 °C
Wafer (725µm) unsawn, tested
Die—temperature range: –40°C to +85°C
Wafer (200µm) unsawn, tested
Evaluation Kit for ZSSC3026, including boards, cable, software, and 1 ZSSC3026 PQFN24 sample
(equivalent to ZSSC3027—kit is recommended for evaluation of the capabilities of the ZSSC3027)
© 2016 Integrated Device Technology, Inc.
2
April 20, 2016



Part Number ZSSC3027
Description 16-Bit Sensor Signal Conditioner
Maker Renesas
Total Page 3 Pages
PDF Download

ZSSC3027 Datasheet PDF





Similar Datasheet

1 ZSSC3026 High Resolution 16-Bit Sensor Signal Conditioner
Zentrum Mikroelektronik Dresden
2 ZSSC3026 High Resolution 16-Bit Sensor Signal Conditioner
IDT
3 ZSSC3026 16-Bit Sensor Signal Conditioner
Renesas
4 ZSSC3027 High-Resolution 16-Bit Sensor Signal Conditioner
IDT
5 ZSSC3027 16-Bit Sensor Signal Conditioner
Renesas





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy