900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Renesas Electronics Components Datasheet

uPC4744 Datasheet

Quad Operational Amplifier

No Preview Available !

μPC844, μPC4744
Single Power Supply, High Speed, Wide Band,
Quad Operational Amplifier
Datasheet
R03DS0137EJ0100
Rev.1.00
2019.1.17
DESCRIPTION
μPC844, μPC4744 are high-speed version of the single-power general-purpose operational amplifier μPC451,
μPC324 realizing high-speed response and high stability. By adopting a high speed PNP transistor circuit,
various characteristics such as slew rate and gain bandwidth are improved, as compared to μPC451 and
μPC324, the load capacity stability is also improved, with no crossover distortion.
It can be used widely for various application circuits such as single power supply AC amplifier, active filter, line
driver, amplifier for light receiving element, etc.
Depending on the usage and operating ambient temperature range, the μPC844 is designed for extended
temperature and suited for wide operating ambient temperature application, and μPC4744 is design for general
purposes. Along with this series of lineup, the dual type operational amplifier, µPC842, μPC4742 with the same
circuit configuration are also available.
FEATURES
Slew Rate (AV = 1 )
7 V/µs (TYP.) (V + = +5 V, V - = GND)
Gain Bandwidth Product (f = 100 kHz)
3.5 MHz (TYP.)
Input Offset Voltage
±2 mV (TYP.)
Input Offset Current
±6 nA (TYP.)
Operating Ambient Temperature
μPC844G2 : TA = -40 ~ +85 C, μPC4744G2 : TA = -20 ~ +80 C,
μPC844GR-9LG : TA = -40 ~ +125 C, μPC4744GR-9LG : TA = -40 ~ +85 C,
Stability to capacitive load (Capacitive load, 1000 pF)
Built-in phase correction circuit.
Built-in output short-circuit protection circuit.
Standard pin (pin compatible) configuration of a quad operational amplifier.
ORDERING INFORMATION
Order Name
μPC844G2-A
μPC4744G2-A
μPC844GR-9LG-A
μPC4744GR-9LG-A
Selected Grade
Standard
Standard
Standard
Standard
Package
14-pin plastic SOP ( 5.72 mm ( 225 ))
14-pin plastic SOP ( 5.72 mm ( 225 ))
14-pin plastic TSSOP ( 5.72 mm ( 225 ))
14-pin plastic TSSOP ( 5.72 mm ( 225 ))
PIN CONFIGURATION (Top View)
OUT1 1
II1 2
IN1 3
V+ 4
IN2 5
II2 6
OUT2 7
1
4
-+ +-
2
3
14 OUT4
13 II4
12 IN4
11 V -
10 IN3
9 II3
8 OUT3
R03DS0137EJ0100 Rev.1.00
2019.1.17
Page 1 of 9


Renesas Electronics Components Datasheet

uPC4744 Datasheet

Quad Operational Amplifier

No Preview Available !

μPC844, μPC4744
EQUIVALENT CIRCUIT (1/4CIRCUIT)
V+
Q7
Q8
Q9
Q10
Q11
Q12
Q2
Q3
II
Q1
Q4
IN
Q18
Q19
OUT
Q14
Q20
Q5
Q6
V-
Q13
Q15
Q16
Q17
ABSOLUTE MAXIMUM RATINGS (TA = 25 C)
Parameter
Symbol
μPC844G2
μPC4744G2
μPC844GR-
9LG
μPC4744GR-
9LG
Unit
Power Supply Voltage Note 1
V+ - V-
-0.3 ~ +36
V
Differential Input Voltage
VID
±36
V
Input Voltage Note 2
VI
V - -0.3 ~ V - +36
V
Output Applied Voltage Note 3
VO
V - -0.3 ~ V + +0.3
V
Total Power Dissipation Note 4
PT
550
mW
Output Short Circuit Duration Note 5 tS
Indefinite
s
Operating Ambient Temperature TA
-40 ~ +85
-20 ~ +80
-40 ~ +125
-40 ~ +85
C
Storage Temperature
Tstg
-55 ~ +125
-55 ~ +150
Note1. Note that reverse connections of the power supply may damage the ICs.
-55 ~ +125
C
2. The allowable input voltage range without damaging or destructing the device. Independent to power supply
voltage range.
Do not apply voltage equivalent to V - (GND) - 0.3 V or less.
Note that the operational amplifier will operate normally when the input voltage applied is within the common
mode input voltage range.
3. The input voltage range that can be applied to the output pin externally without deteriorating or damaging the
device characteristic. The permitted input voltage that can be applied regardless of the power supply voltage.
This specification also includes precaution during transition state such as ON/OFF, etc.
4. This is the value when the glass epoxy substrate (size: 100 mm x 100 mm, thickness: 1 mm, 15% of the
substrate area where only one side is copper foiled is filling wired) is mounted.
Note that restrictions will be made to the following conditions for each product, and the de-rating ratio depending
on the operating ambient temperature.
μPC844G2, 4744G2 : De-rate -5.5 mW/C when TA 25 C
(Junction − ambient thermal resistance Rth(J-A) = 182 C/W)
μPC844GR-9LG : De-rate -7.0 mW/C when TA 71 C
(Junction − ambient thermal resistance Rth(J-A) = 144 C/W)
μPC4744GR-9LG : De-rate -7.0 mW/C when TA 46 C
(Junction − ambient thermal resistance Rth(J-A) = 144 C/W)
5. Please use the total loss and the de-rating factor of Note 4.
R03DS0137EJ0100 Rev.1.00
2019.1.17
Page 2 of 9



Part Number uPC4744
Description Quad Operational Amplifier
Maker Renesas
Total Page 3 Pages
PDF Download

uPC4744 Datasheet PDF





Similar Datasheet

1 UPC4741 HIGH PERFORMANCE QUAD OPERATIONAL AMPLIFIER
NEC
2 UPC4742 DUAL OPERATIONAL AMPLIFIERS
NEC
3 uPC4742 Dual Operational Amplifier
Renesas
4 UPC4744 Quad Operational Amplifier
NEC
5 uPC4744 Quad Operational Amplifier
Renesas





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy