Under development Preliminary specification
Specifications in this manual are tentative and subject to change.
M16C/30P Group
1. Overview
1.2 Performance Outline
Table 1.1 lists Performance Outline of M16C/30P Group.
Table 1.1 Performance Outline of M16C/30P Group
Item Performance
CPU
Number of Basic Instructions 91 instructions
Minimum Instruction
Execution Time
62.5ns(f(XIN)=16MHz, VCC1=VCC2=4.2 to 5.5V, no wait)
100ns(f(XIN)=10MHz, VCC1=VCC2=2.7 to 5.5V, no wait)
Operation Mode
Single-chip
Memory Space
1 Mbyte
Memory Capacity
See Table 1.2 Product List
Peripheral
Function
Port
Multifunction Timer
Input/Output : 87 pins, Input : 1 pin
Timer A : 16 bits x 3 channels,
Timer B : 16 bits x 3 channels
Serial Interface
3 channels
Clock synchronous, UART,
I2C bus(1)
1 channels
IEBus(2)
A/D Converter
10-bit A/D converter: 1 circuit, 18 channels
DMAC
2 channels
CRC Calculation Circuit
CCITT-CRC
Watchdog Timer
15 bits x 1 channel (with prescaler)
Interrupt
Internal: 20 sources, External: 7 sources, Software: 4
sources, Priority level: 7 levels
Clock Generating Circuit
2 circuits
Main clock generation circuit (*),
Subclock generation circuit (*),
(*)Equipped with a built-in feedback resistor.
Electric
Supply Voltage
Characteristics
VCC1=VCC2=3.0 to 5.5 V (f(XIN)=16MHz)
VCC1=VCC2=2.7 to 5.5 V (f(XIN)=10MHz, no wait)
Power Consumption
10 mA (VCC1=VCC2=5V, f(XIN)=16MHz)
8 mA (VCC1=VCC2=3V, f(XIN)=10MHz)
1.8 µA (VCC1=VCC2=3V, f(XCIN)=32kHz, wait mode)
0.7 µA(VCC1=VCC2=3V, stop mode)
Operating Ambient Temperature
-20 to 85°C, -40 to 85°C
Package
100-pin plastic mold QFP, LQFP
NOTES:
1. I2C bus is a registered trademark of Koninklijke Philips Electronics N. V.
2. IEBus is a registered trademark of NEC Electronics Corporation.
3. Use the M16C/30P on VCC1 = VCC2.
Rev.0.80 Mar 18, 2005 Page 2 of 34
REJ03B0088-0080
