www.DataSheet4U.com
M16C/62 Group (M16C/62P, M16C/62PT)
1. Overview
1.2 Performance Outline
Table 1.1 to table 1.3 list performance outline of M16C/62 group (M16C/62P, M16C/62PT).
Table 1.1 Performance outline of M16C/62 group (M16C/62P) (128-pin version)
Item
CPU
Number of basic instructions
Shortest instruction execution time
Operation mode
Memory space
Peripheral
function
Memory capacity
Port
Multifunction timer
Serial I/O
A-D converter
D-A converter
DMAC
CRC calculation circuit
Watchdog timer
Interrupt
Clock generating circuit
Oscillation stop detection function
Electric
characteris-
tics
Voltage detection circuit
Supply voltage
Power consumption
Flash memory Program/erase supply voltage
Version
Program and erase endurance
Operating ambient temperature
Package
Performance
M16C/62P
91 instructions
41.7ns(f(BCLK)=24MHz, VCC1=3.0 to 5.5V)
100ns(f(BCLK)=10MHz, VCC1=2.7 to 5.5V)
Single-chip, memory expansion and microprocessor mode
1 Mbyte (Available to 4M bytes by memory space
expansion function)
See table 1.4 and 1.5 Product List
Input/Output : 113 pins, Input : 1 pin
Timer A : 16 bits x 5 channels, Timer B : 16 bits x 6 channels
Three phase motor control circuit
3 channels
Clock synchronous, UART,
I2C bus (1), IEBus (2)
2 channels
Clock synchronous
10-bit A-D converter: 1 circuit, 26 channels
8 bits x 2 channels
2 channels
CCITT-CRC
15 bits x 1 channel (with prescaler)
Internal: 29 sources, External: 8 sources, Software: 4 sources,
Priority level: 7 levels
4 circuits
Main clock generation circuit (*),
Subclock generation circuit (*),
Ring oscillator, PLL synthesizer
(*)Equipped with a built-in feedback resistor.
Stop detection of main clock oscillation, re-oscillation detection
function
Available (option (4))
VCC1=3.0 to 5.5V, VCC2=2.7V to VCC1 (f(BCLK)=24MHz)
VCC1=2.7 to 5.5V, VCC2=2.7V to VCC1 (f(BCLK)=10MHz)
14 mA (VCC1=VCC2=5V, f(BCLK)=24MHz)
8 mA (VCC1=VCC2=3V, f(BCLK)=10MHz)
1.8 µA (VCC1=VCC2=3V, f(XCIN)=32kHz, wait mode)
0.7 µ A (VCC1=VCC2=3V, stop mode)
3.3 ± 0.3 V or 5.0 ± 0.5 V
100 times (all area)
or 1,000 times (user ROM area without block 1)
/ 10,000 times (block A, block 1) (3)
–20 to 85oC
–40 to 85oC (3)
128-pin plastic mold QFP
NOTES:
1. I2C bus is a registered trademark of Koninklijke Philips Electronics N. V.
2. IEBus is a registered trademark of NEC Electronics Corporation.
3. See table 1.8 Product Code for the program and erase endurance, and operating ambient temperature.
In addition 1,000 times/10,000 times are under development as of Oct., 2003. Please inquire about a release schedule.
4. All options are on request basis.
Rev.2.10 Nov. 07, 2003 page 2 of 84
