RT5753 Datasheet | Richtek

Description The RT5753 is a simple, easy-to-use, 3A synchronous step-down DC-DC converter with an input supply voltage range from 2.5V to 6V. The device builds in an accurate 0.6V reference voltage and integrates low RDS(ON) power MOSFETs to achieve high efficiency in WDFN-8L 2x2 and WDFN-8SL 2x2 packages. The RT5753 adopts Advanced Constant On-Time (ACOT®) control architecture to provide an ultrafast transient response with few external ponents and to operate in nearly constant switching frequency over the line, load, and output voltage range. The RT5753A/C/E/F operates in automatic PSM that maintains high efficiency during light load operation. The RT5753B/D operates in Forced PWM that helps to meet tight voltage regulation accuracy requirements. The RT5753 senses both FETs current for a robust overcurrent protection. The device features cycle-by-cycle current limit protection which prevents the device from the catastrophic damage in output short circuit, over current or inductor saturation. A built-in soft-start function prevents inrush current during start-up. The device also includes input undervoltage lockout, output undervoltage protection, overvoltage protection (RT5753AL/BL/CL/DL/EL/FL) and over-temperature protection to provide safe and smooth operation in all operating conditions. Features - Input Voltage Range from 2.5V to 6V - Integrated 100mΩ and 70mΩ FETs - 100% Duty Cycle for Lowest Dropout - Internal Reference Voltage with 1% Accuracy - 1.2MHz Typical Switching Frequency - Power Saving Mode for Light Loads (RT5753A/C/E/F) - Advanced Constant On-Time (ACOT®) Control - Internal Soft-Start (1.5ms/750μs) - Enable Control Input - Power Good Indicator - Both FETs Overcurrent Protection - Negative Overcurrent Protection (RT5753B/D) - Input Undervoltage Lockout Protection - Output Undervoltage Protection - Over-Temperature Protection - Ro HS pliant and Halogen Free Applications - Mobile Phones and Handheld Devices - STB, Cable Modem, and x DSL Platforms -...