RT6190 Datasheet | Richtek

Description The RT6190 is a 4-switch bidirectional Buck-Boost controller designed for USB power delivery (USB PD). It operates with wide input voltage range from 4.5V to 36V, and the output voltage can be programmable between 3V and 36V. The RT6190 implements peak current mode control mechanism with the programmable constant voltage (CV) and constant current (CC) output to support USB-PD 3.0 SPR mode and 3.1 EPR mode. It also has built-in charge pumps for driving external low-cost N-MOSFETs to control the power path. With an I2C patible interface, the RT6190 supports many programmable functions including CV/CC output, switching frequency, and cable voltage drop pensation. Moreover, the RT6190 integrates fully protection such as input UVLO, over/under voltage protection, cycle-by-cycle current limit, short protection, and over-temperature protection. The RT6190 is available in a WQFN-40L 5x5 package. Applications - Monitor - USB Power Delivery - Power Bank - Features - Support USB-PD 3.0 SPR Mode and 3.1 EPR Mode - Integrated Buck-Boost Controller : - Wide Input Voltage Range : 4.5V to 36V - Wide Output Voltage Range : 3V to 36V - Peak Current Mode Control - Programmable Switching Frequency (250k Hz to 1MHz) - Power Saving Mode Enables Higher Light Load Efficiency - Any Power TM for Constant Voltage (12.5m V/step, Typ.) and Constant Current (in 9-Bit Resolution) Output Settings - Bi-directional Power Delivery for Forward Operation and Reverse Operation - Embedded 2nd OCP Function - I2C patible Interface - Adjustable Soft-Start Time - Programmable Cable Voltage Drop pensation - Built-in Bleeders for Quick VBUS Discharge - Power Good Indicator - Fully Protection with UVLO, OVP, UVP, OCP, Cycle-by-Cycle Current Limit and OTP - WQFN-40L 5x5 Package Simplified Application Circuit VSYS Q1 Q4 Q2 Q3 PGOOD External 5V I2C Signal RT6190 BOOT1 BOOT2 SW1 LDRV1 HDRV1 PSINN CSINN SW2 LDRV2 HDRV2 PSOUTN CSOUTP CSINP VIN EN VBYP ALERT SCL SDA PGOOD VDD...