RT6264A Datasheet | Richtek

Description The RT6264A/B is a simple, easy-to-use, 4A synchronous step-down DC-DC converter with an input supply voltage range of 4.5V to 18V. The device possesses an accurate 0.765V reference voltage and integrates low RDS(ON) power MOSFETs to achieve high efficiency. The RT6264A/B adopts Advanced Constant On-Time (ACOT® ) control architecture to provide an ultrafast transient response with few external ponents and to operate in nearly constant switching frequency over the line, load, and output voltage range. The RT6264A operates in automatic PSM that maintains high efficiency during light load operation. The RT6264B operates in Forced PWM that helps meet tight voltage regulation accuracy requirements. The RT6264A/B senses both FETs current for a robust over-current protection. The device features cycle-by-cycle current limit protection to prevent the device from the catastrophic damage in output short circuit, over-current or inductor saturation conditions. A built-in soft-start function prevents inrush current during start-up. The device also includes input under-voltage lockout, output under-voltage protection, and over-temperature protection (thermal shutdown) to provide safe and smooth operation in all operating conditions. The remended junction temperature range is - 40C to 125C. Features - 4A Converter Integrated 66m and 36m FETs - Input Supply Voltage Range : 4.5V to 18V - Output Voltage Range : 0.765V to 7V - Advanced Constant On-Time (ACOT® ) Control - Ultrafast Transient Response - Optimized for Low-ESR Ceramic Output Capacitors - High Accuracy Feedback Reference Voltage : Typ. 1% - Optional for Operation Modes : - RT6264A : Power Saving Mode (PSM) - RT6264B : Forced PWM Mode - Fixed Switching Frequency : 650k Hz - Enable Control and Internally Fixed Soft-Start with typ. 1ms - Input Under-Voltage Lockout (UVLO) - Protection Function - Output Under-Voltage Protection (UVP) with Hiccup Mode - High- / Low-side MOSFET OCP and OTP Function - Ro HS...