RT8010A Datasheet | Richtek

Description The RT8010/A is a high efficiency Pulse-Width-Modulated (PWM) step-down DC-DC converter. Capable of delivering 1A output current over a wide input voltage range from 2.5V to 5.5V, the RT8010/A is ideally suited for portable electronic devices that are powered from 1-cell Li-ion battery or from other power sources such as cellular phones, PDAs and hand-held devices. Two operating modes are available including : PWM/Low Dropout autoswitch and shutdown modes. The Internal synchronous rectifier with low RDS(ON) dramatically reduces conduction loss at PWM mode. No external Schottky diode is required in practical application. The RT8010/A enters Low Dropout mode when normal PWM cannot provide regulated output voltage by continuously turning on the upper P-MOSFET. The RT8010/A enter shut-down mode and consumes less than 0.1μA when EN pin is pulled low. The switching ripple is easily smoothed-out by small package filtering elements due to a fixed operating frequency of 1.5MHz. This along with small WDFN-6L 2x2 and WQFN-16L 3x3 package provides small PCB area application. Other features include soft start, lower internal reference voltage with 2% accuracy, over temperature protection, and over current protection. Features - 2.5V to 5.5V Input Range - Output Voltage (Adjustable Output From 0.6V to VIN)  RT8010 : 1V, 1.2V, 1.5V, 1.6V, 1.8V, 2.5V and 3.3V Fixed/Adjustable Output Voltage  RT8010A Adjustable Output Voltage Only - 1A Output Current - 95% Efficiency - No Schottky Diode Required - 1.5MHz Fixed-Frequency PWM Operation - Small 6-Lead WDFN and 16-Lead WQFN Package - Ro HS pliant and 100% Lead (Pb)-Free Applications - Mobile Phones - Personal Information Appliances - Wireless and DSL Modems - MP3 Players - Portable Instruments Pin Configuration (TOP VIEW) IC 1 EN 2 VIN 3 16 15 14 13 GND 1 12 VIN 6 FB/VOUT GND 2 5 GND GND 3 7 4 LX FB/VOUT 4 11 VIN 10 VIN 9 VIN GND IC IC LX EN LX IC LX WDFN-6L 2x2...