3A, 2MHz, Synchronous Step-Down Converter
The RT8015A is a high efficiency synchronous, step-down
DC/DC converter. Its input voltage range is from 2.6V to
5.5V and provides an adjustable regulated output voltage
from 0.8V to 5V while delivering up to 3A of output current.
The internal synchronous low on-resistance power
switches increase efficiency and eliminate the need for
an external Schottky diode. The switching frequency is
set by an external resistor or can be synchronized to an
external clock. The 100% duty cycle provides low dropout
operation extending battery life in portable systems.
Current mode operation with external compensation
allows the transient response to be optimized over a wide
range of loads and output capacitors.
The RT8015A is operated in forced continuous PWM Mode
which minimizes ripple voltage and reduces the noise and
The 100% duty cycle in Low Dropout Operation further
maximize battery life.
The RT8015A is available in the WDFN-10L 3x3 package.
QW : WDFN-10L 3x3
Lead Plating System
P : Pb Free
G : Green (Halogen Free and Pb Free)
Richtek products are :
` RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
` Suitable for use in SnPb or Pb-free soldering processes.
z High Efficiency : Up to 95%
z Low RDS(ON) Internal Switches : 110mΩ
z Programmable Frequency : 300kHz to 2MHz
z No Schottky Diode Required
z 0.8V Reference Allows for Low Output Voltage
z Forced Continuous Mode Operation
z Low Dropout Operation : 100% Duty Cycle
z RoHS Compliant and 100% Lead (Pb)-Free
z Portable Instruments
z Battery-Powered Equipment
z Notebook Computers
z Distributed Power Systems
z IP Phones
z Digital Cameras
For marking information, contact our sales representative
directly or through a Richtek distributor located in your
DS8015A-04 March 2011