Datasheet4U Logo Datasheet4U.com

BD2812GU - 2-Channel RGB Charge Pump LED Driver

Datasheet Summary

Description

The BD2812GU is a RGB LED driver for decorative purposes.

This RGB driver has lighting patterns and can illuminate LEDs without load of CPU.

This RGB driver is best-suited for illumination using RGB LEDs, and decoration using monochrome LEDs.

Features

  • RGB LED driver (dual drivers) A slope control function is incorporated (allowing dual drivers to be controlled independently). Slope control can be implemented using the DC current. Two modes “continuous illumination mode” and “illumination single cycle mode” are supported. Independent external ON/OFF synchronizing terminals (of dual drivers) are provided. Multiple drivers can be used concurrently by using the I2C address change function and supporting reference clock I/O. Low consumption operat.

📥 Download Datasheet

Datasheet preview – BD2812GU

Datasheet Details

Part number BD2812GU
Manufacturer ROHM
File Size 1.25 MB
Description 2-Channel RGB Charge Pump LED Driver
Datasheet download datasheet BD2812GU Datasheet
Additional preview pages of the BD2812GU datasheet.

📁 Similar Datasheet

  • BD286 - PNP Transistor (INCHANGE)
  • BD287 - PNP SILICON PLANAR TRANSISTORS (Siemens Semiconductor Group)
  • BD288 - PNP SILICON PLANAR TRANSISTORS (Siemens Semiconductor Group)
  • BD201 - Silicon NPN Power Transistor (Inchange Semiconductor)
  • BD201 - SILCON EPITAXIAL-BASE POWER TRANSISTORS (Comset Semiconductors)
  • BD201F - NPN Transistor (INCHANGE)
  • BD202 - Silicon PNP Power Transistor (Inchange Semiconductor)
  • BD202 - PNP PLASTIC POWER TRANSISTORS (CDIL)
  • BD202 - SILCON EPITAXIAL-BASE POWER TRANSITORS (Comset Semiconductors)
  • BD202F - PNP Transistor (INCHANGE)
Other Datasheets by Rohm

Full PDF Text Transcription

Click to expand full text
Datasheet 2-Channel RGB Charge Pump LED Driver with Illumination BD2812GU ●General Description The BD2812GU is a RGB LED driver for decorative purposes. This RGB driver has lighting patterns and can illuminate LEDs without load of CPU. This RGB driver is best-suited for illumination using RGB LEDs, and decoration using monochrome LEDs. The DC/DC block adopts a charge pump system and not uses an inductor. This RGB driver has been miniaturized through the use of a VCSP85H3 (3.1 mm×3.1 mm 0.5 mm pitch) chip size package. ●Features RGB LED driver (dual drivers) A slope control function is incorporated (allowing dual drivers to be controlled independently). Slope control can be implemented using the DC current.
Published: |