BM2P014 - DC/DC converter

Product Overview

Rohm

Datasheet Details

Part number	BM2P014
Manufacturer	ROHM
File Size	2.02 MB
Description	DC/DC converter
Datasheet	BM2P014 Datasheet
Additional preview pages of the BM2P014 datasheet.

Product details

Description

The PWM type DC/DC converter (BM2Pxx4 Series) for AC/DC provide an optimum system for all products that include an electrical outlet.This IC supports both isolated and non-isolated devices, enabling simpler design of various types of low-power electrical converters.This IC built in a HV starter circuit that tolerates 650V, it contributes to low-power consumption.With current detection resistors as external devices, a higher degree of design freedom is achieved.Since current mode c

Features

PWM frequency : 65kHz.
PWM current mode method.
Burst operation when load is light.
Frequency reduction function.
Built-in 650V start circuit.
Built-in 650V switching MOSFET.
VCC pin under voltage protection.
VCC pin overvoltage protection.
SOURCE pin Open protection.
SOURCE pin Short protection.
SOURCE pin Leading-Edge-Blanking function.
Per-cycle over current protection circuit.
Soft start.
Secondary Over current protection.

📁 Similar Datasheet

BM2P011 - DC/DC Converter (ROHM)
BM2P012 - DC/DC Converter (ROHM)
BM2P013 - DC/DC Converter (ROHM)
BM2P015-Z - DC/DC Converter (ROHM)
BM2P016-Z - DC/DC Converter (ROHM)
BM2P0161-Z - DC/DC Converter (ROHM)
BM2P0162T-Z - DC/DC Converter (ROHM)
BM2P0163T-Z - DC/DC Converter (ROHM)

Other Datasheets by Rohm

BM2P034 - DC/DC converter
BM2P054 - DC/DC converter
BM2P094 - DC/DC converter
BM2P034 - DC/DC converter
BM2P054 - DC/DC converter
BM2P094 - DC/DC converter

Published: Nov 8, 2016 |