Datasheet4U Logo Datasheet4U.com

BM2P094 Datasheet DC/dc Converter

Manufacturer: ROHM

Overview: Datasheet AC/DC Drivers PWM type DC/DC converter IC Included 650V MOSFET BM2Pxx4 Series.

This datasheet includes multiple variants, all published together in a single manufacturer document.

General Description

The PWM type DC/DC converter (BM2Pxx4 Series) for AC/DC provide an optimum system for all products that include an electrical outlet.

This IC supports both isolated and non-isolated devices, enabling simpler design of various types of low-power electrical converters.

This IC built in a HV starter circuit that tolerates 650V, it contributes to low-power consumption.

Key Features

  • PWM frequency : 65kHz.
  • PWM current mode method.
  • Burst operation when load is light.
  • Frequency reduction function.
  • Built-in 650V start circuit.
  • Built-in 650V switching MOSFET.
  • VCC pin under voltage protection.
  • VCC pin overvoltage protection.
  • SOURCE pin Open protection.
  • SOURCE pin Short protection.
  • SOURCE pin Leading-Edge-Blanking function.
  • Per-cycle over current protection circuit.
  • Soft start.
  • Secondary Over current protection.

BM2P094 Distributor

More Datasheets from ROHM

Part Number Description
BM2P094F DC/DC Converter
BM2P091 DC/DC Converter
BM2P091F DC/DC Converter
BM2P092 DC/DC Converter
BM2P092F DC/DC Converter
BM2P093 DC/DC Converter
BM2P093F DC/DC Converter
BM2P011 DC/DC Converter
BM2P012 DC/DC Converter
BM2P013 DC/DC Converter