1) ROHM new technology “STEP FREE” structure will provide, high corrosion resistance, better resistance against scratching damage, high efficiency. 2) High dot reproducibility with step-free structure. 3) Head inclination by near-edge structure, applicable to the large-size platen. Resin type thermal-transfer ink-ribbon can be used. 3) High-hardness protect cote type “W-coat” is employed with 150km abrasion life-time. 4) Even without history-control, high-speed printing more than 200mm / s can b.
Full PDF Text Transcription for SH3002-DC90A (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
SH3002-DC90A. For precise diagrams, and layout, please refer to the original PDF.
www.DataSheet4U.com Tentative Printheads SH3002-DC90A Near edge thermal printhead (300 dots / inch) SH3002-DC90A SH-DC90 series was developed with two key structures step...
View more extracted text
SH3002-DC90A SH-DC90 series was developed with two key structures step-free and near edge for the packaging printer market which requires high speed continuous printing. It is suitable for printers in factory line where high speed 24 hours continuous printing is required. zApplications Bar code printer Label printer Packaging printer ATM Ticket printer zFeatures 1) ROHM new technology “STEP FREE” structure will provide, high corrosion resistance, better resistance against scratching damage, high efficiency. 2) High dot reproducibility with step-free structure. 3) Head inclination by near-edge structure, applicable to the l
SH3002-DC90A Datasheet
