Datasheet4U Logo Datasheet4U.com

MS90C365 - Flat Panel Display Transmitter

General Description

The MS90C365 transmitter converts 21 bits of LVCMOS/LVTTL data into four LVDS (Low Voltage Differential Signaling) data streams.

A phase-locked transmit clock is transmitted in parallel with the data streams.

Key Features

  • Frequency Range：20-150MHz.
  • Single Supply:3.3V.
  • I/O power supply compatible with 1.8V, 3.3V.
  • Power-down mode < 200µW (max).
  • Supports VGA, SVGA, XGA and Dual Pixel SXGA.
  • Up to 525 Megabytes/sec bandwidth.
  • reduced swing LVDS to reduce EMI（200mV or 345mV Optional）.
  • Internal PLL.
  • Low profile 48 lead TSSOP package.
  • Compatible with TIA/EIA-644 LVDS standard Pin Definition Hangzhou Ruimeng Technology Co. ,LTD Http: www. relmon. com -- 1 - - MS90C365 M.

📥 Download Datasheet

Datasheet Details

Part number MS90C365
Manufacturer Ruimeng
File Size 492.65 KB
Description Flat Panel Display Transmitter
Datasheet download datasheet MS90C365 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MS90C385 24bits flat panel display (FPD) LVDS signal transmitter Ruimeng Technology
MS90C386 24bits flat panel display (FPD) LVDS signal receiver Ruimeng Technology
MS90C386B 24bits COLOR LVDS Receiver Ruimeng Technology
MS9000 Single axis analog accelerometer SAFRAN
MS9006 2-Wire Transmitter Microsyst

Other Datasheets by Ruimeng

Part Number Description
MS90C032 LVDS Quad CMOS Receiver
MS90C032T LVDS Quad CMOS Receiver
MS90C104 30bits COLOR LVDS Receiver
MS91050 Configurable AFE
MS9280 10-Bit 35MSPS A/D Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MS90C365 MS90C365 ——+3.3V LVDS 18-Bit Flat Panel Display Transmitter-150 MHz General Description The MS90C365 transmitter converts 21 bits of LVCMOS/LVTTL data into four LVDS (Low Voltage Differential Signaling) data streams. A phase-locked transmit clock is transmitted in parallel with the data streams. At a transmit clock frequency of 150MHz, 18 bits of RGB data and 3 bits of LCD timing and control data are transmitted at a rate of 1050 Mbps per LVDS data channel. Using a 150 MHz clock, the data throughput is 525 Mbytes/sec. The MS90C365 can be programmed for Rising edge strobe or Falling edge strobe through the R_FB pin. This chipset is an ideal means to solve EMI and cable size problems associated with wide, high-speed TTL interfaces.