SIM2601MA Datasheet | Sanken

Sine-wave Driving, High Voltage 3-phase Motor Drivers with Built-in Hall Amplifiers SIM260x M Series Data Sheet Description The SIM260x M series are high voltage 3-phase motor drivers driven by a sinusoidal control, which can support Hall element and Hall IC inputs, thus offering highefficient yet low-noise motor control. Supplied in a highly heat-dissipating DIP package, where a controller, a gate driver, the output transistors of three phases, and bootstrap diodes are highly integrated, the SIM260x M series requires only a few external ponents for building a motor driver. This also allows a motor driver to be highly reliable in performance and design-friendly with its pactness. These products can optimally control the inverter systems of low- to medium-capacity motors that require universal input standards. Features - Pb-free (Ro HS pliant) - SIM2601MA: Isolation Voltage: 1500 V (for 1 min) (UL Recognition Pending) SIM2602M: Isolation Voltage: 1500 V (for 1 min) UL-recognized ponent (File No.: E118037) - Low Noise, High Efficiency (Sinusoidal Current Waveform) - Reduced Number of Parts Achieved by Built-in Bootstrap Diodes - Hall Element and Hall IC Inputs - Application-specific Optimal Settings with External Signals: - Motor Speed - Phase Adavance Angle - Motor Direction - User-settable Motor Lock Detection (Enabled or Disabled) - 5 V Reference Voltage Output (Used for Driving Hall Elements etc.) - Fault Signal Output at Protection Activation (FO Pin) - Protections Include: - VREG Pin Undervoltage Lockout (UVLO_REG) - Undervoltage Lockout for Power Supplies VBx Pin (UVLO_VB) VCC Pin (UVLO_VCC) - Overcurrent Limit (OCL) - Overcurrent Protection (OCP) - Thermal Shutdown (TSD) - Motor Lock Protection (MLP) - Reverse Rotation...