SEP ELECTRONIC CORP.
5000 Watt Peak Power Transient Voltage Suppressors
Reverse Stand-off Voltage 5.0 to 180 V
5000 Watts surge capability at 1ms
Excellent clamping capability
Low zener impedance
Fast response time: typically less than
1.0ps from 0 Volt to 8 Volt min.
Typical IR less than 1 A above 10 V
High temperature soldering guaranteed 265 C/10
seconds at 5 lbs (2.3kg) tension
Case: Molded plastic
Terminals: Solder plated solderable per MIL-STD-202,
Polarity: Cathode band
Mounting Position: Any
Weight: 2.1 grams (approx)
All dimensions inches and (millimeters)
Maximum Ratings & Electrical Characteristics
Rating at 25 C ambient temperature unless otherwise specified, Resistive or Inductive load, 60 Hz.
For Capacitive load derate current by 20%.
Minimum Peak Power Dissipation at TA = 25 C, TP = 1ms(Note 1) PPK
Steady State Power Dissipation at TL = 75 C
Lead Length .375"(9.5mm)(Note 2)
Peak Forward Surge Current at 8.3ms Single Half Sine-Wave
superimposed on rated load(JEDEC method)(Note 3)
Operating and Storage Temperature Range
-55 to 175
1.Non-repetitive current pulse per fig.3 and derated above TA = 25 C per fig.2
2.Mounted on copper pad area 1.6"X1.6"(40mmX40mm) per fig.5
3.8.3ms single half sine-wave,duty cycle=4pulses per minute maximum.
Devices for Bipolar Applications
1. For Bidirection use C or CA suffix for types 5KP5.0 THRU 5KP180.
2. Electrical characteristics apply in both directions.
2003 SEP ELECTRONIC CORP.