Datasheet4U Logo Datasheet4U.com

SGM3760 - Dual-Channel WLED Driver

General Description

The SGM3760 and SGM3760A are dual-channel screen flash WLED drivers which provide highly integrated solutions for single-cell Li-Ion battery powered smart phone backlight.

Key Features

  • 2.7V to 5.5V Input Voltage Range.
  • Integrated 3.6A/40V MOSFET.
  • 1.15MHz Switching Frequency.
  • Optimized Rise Time and Fall Time to Control EMI for SW Pin.
  • Dual Current Sinks.
  • Up to 30mA Current Each in Backlight Mode.
  • 4× Output Current in Screen Flash Mode for up to 330ms (SGM3760).
  • 3× Output Current in Screen Flash Mode for up to 330ms (SGM3760A).
  • 1% Typical Current Matching and Accuracy.
  • Adaptive Boost Output to WLED Voltages.
  • Very Low Volta.

📥 Download Datasheet

Datasheet Details

Part number SGM3760
Manufacturer SG Micro
File Size 0.96 MB
Description Dual-Channel WLED Driver
Datasheet download datasheet SGM3760 Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SGM3760/SGM3760A 40V High Efficiency Step-Up, Dual-Channel WLED Drivers with Flash Mode GENERAL DESCRIPTION The SGM3760 and SGM3760A are dual-channel screen flash WLED drivers which provide highly integrated solutions for single-cell Li-Ion battery powered smart phone backlight. The SGM3760/A have a built-in high efficiency boost regulator with integrated 3.6A/40V power MOSFET and support as low as 2.7V input voltage. With two high current-matching capability current sink regulators, the devices can drive up to 10S2P WLEDs. The SGM3760/A are quite suitable for smart phone image capture using display device as screen flash light sources, as they can output up to 80mA/60mA current per channel at 32V for 330ms when the strobe signal is active.