Datasheet4U Logo Datasheet4U.com

SGM3760A - Dual-Channel WLED Driver

This page provides the datasheet information for the SGM3760A, a member of the SGM3760 Dual-Channel WLED Driver family.

Datasheet Summary

Description

The SGM3760 and SGM3760A are dual-channel screen flash WLED drivers which provide highly integrated solutions for single-cell Li-Ion battery powered smart phone backlight.

Features

  • 2.7V to 5.5V Input Voltage Range.
  • Integrated 3.6A/40V MOSFET.
  • 1.15MHz Switching Frequency.
  • Optimized Rise Time and Fall Time to Control EMI for SW Pin.
  • Dual Current Sinks.
  • Up to 30mA Current Each in Backlight Mode.
  • 4× Output Current in Screen Flash Mode for up to 330ms (SGM3760).
  • 3× Output Current in Screen Flash Mode for up to 330ms (SGM3760A).
  • 1% Typical Current Matching and Accuracy.
  • Adaptive Boost Output to WLED Voltages.
  • Very Low Volta.

📥 Download Datasheet

Datasheet preview – SGM3760A

Datasheet Details

Part number SGM3760A
Manufacturer SG Micro
File Size 0.96 MB
Description Dual-Channel WLED Driver
Datasheet download datasheet SGM3760A Datasheet
Additional preview pages of the SGM3760A datasheet.
Other Datasheets by SG Micro

Full PDF Text Transcription

Click to expand full text
SGM3760/SGM3760A 40V High Efficiency Step-Up, Dual-Channel WLED Drivers with Flash Mode GENERAL DESCRIPTION The SGM3760 and SGM3760A are dual-channel screen flash WLED drivers which provide highly integrated solutions for single-cell Li-Ion battery powered smart phone backlight. The SGM3760/A have a built-in high efficiency boost regulator with integrated 3.6A/40V power MOSFET and support as low as 2.7V input voltage. With two high current-matching capability current sink regulators, the devices can drive up to 10S2P WLEDs. The SGM3760/A are quite suitable for smart phone image capture using display device as screen flash light sources, as they can output up to 80mA/60mA current per channel at 32V for 330ms when the strobe signal is active.
Published: |