Datasheet4U Logo Datasheet4U.com

SGM722Q - Rail-to-Rail I/O CMOS Operational Amplifier

General Description

The SGM722Q is a dual, low voltage, low noise and low power operational amplifier for automotive applications.

This device can operate from 2.1V to 5.5V single supply, and consumes low quiescent current.

Key Features

  • a ±6.5mV maximum input offset voltage. The minimum input common mode voltage is within 0.1V below the negative rail, and the output swing is rail-to-rail with heavy loads. It exhibits a high gain-bandwidth product of 11MHz and a slew rate of 7V/μs. These specifications make the operational amplifier appropriate for various.

📥 Download Datasheet

Datasheet Details

Part number SGM722Q
Manufacturer SG Micro
File Size 740.08 KB
Description Rail-to-Rail I/O CMOS Operational Amplifier
Datasheet download datasheet SGM722Q Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SGM722 Rail-to-Rail I/O CMOS Operational Amplifiers Shengbang Microelectronics
SGM7222 High Speed USB 2.0 (480Mbps) DPDT Analog Switch SG Micro Limited
SGM7223 High Speed USB 2.0(480Mbps) DPDT Analog Switch SG Micro Limited
SGM721 Rail-to-Rail I/O CMOS Operational Amplifiers Shengbang Microelectronics
SGM723 Rail-to-Rail I/O CMOS Operational Amplifiers Shengbang Microelectronics

Other Datasheets by SG Micro

Part Number Description
SGM7220 USB Type-C Configuration Channel Logic and Port Control
SGM72204A SP4T Antenna Tuning Switch
SGM7222 High Speed USB 2.0 DPDT Analog Switch
SGM7227 High Speed USB 2.0 DPDT Analog Switch
SGM72002 High Linearity SPDT RF Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SGM722Q Automotive, 11MHz, Rail-to-Rail I/O CMOS Operational Amplifier GENERAL DESCRIPTION The SGM722Q is a dual, low voltage, low noise and low power operational amplifier for automotive applications. This device can operate from 2.1V to 5.5V single supply, and consumes low quiescent current. The SGM722Q features a ±6.5mV maximum input offset voltage. The minimum input common mode voltage is within 0.1V below the negative rail, and the output swing is rail-to-rail with heavy loads. It exhibits a high gain-bandwidth product of 11MHz and a slew rate of 7V/μs. These specifications make the operational amplifier appropriate for various applications. The device is AEC-Q100 qualified (Automotive Electronics Council (AEC) standard Q100 Grade 1) and it is suitable for automotive applications.