Datasheet4U Logo Datasheet4U.com

BL6513 - Three-phase Active Energy Meter

Description

The BL0952A/BL6513/BL6511 is the chief IC of the three-phase electrical meter and a high accuracy energy measurement IC.

With low power design, static power is only 25mW.

Features

  • High accuracy, less than 0.1% error over a dynamic range of 500:1 High stability during calibration, the fluctuation of output CF is less than 0.1%. Low drift, the gain variety is less than 0.1% when input frequency changes from 45Hz to 65Hz Single 5V Supply, Static Power 25mW(typical), Power solution only with Resistor & Capacitor can be adopted. The Low Frequency Output (F1, F2) can drive motor directly; The High Frequency Output (CF) can be used in calibration and data processing. Selectable.

📥 Download Datasheet

Datasheet Details

Part number BL6513
Manufacturer SHANGHAI BELLING
File Size 510.96 KB
Description Three-phase Active Energy Meter
Datasheet download datasheet BL6513 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BL6503E Single Phase Energy Meter BELLING
BL652 enable OEMs to add single-mode Bluetooth Laird
BL652-SA enable OEMs to add single-mode Bluetooth Laird
BL652-SC enable OEMs to add single-mode Bluetooth Laird
BL6522 Phase multi-function high-precision Electronic power-metering BELLING

Other Datasheets by SHANGHAI BELLING

Part Number Description
BL6513C Three-phase four-wire wide-range meter
BL6511 Three-phase Active Energy Meter
BL6512 With phase-phase meter
BL6514 Phase active power metering chip
BL6501 Single Phase Energy Meter IC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Three-phase Active BL0952A/BL6513/BL6511 Energy Meter FEATURES High accuracy, less than 0.1% error over a dynamic range of 500:1 High stability during calibration, the fluctuation of output CF is less than 0.1%. Low drift, the gain variety is less than 0.1% when input frequency changes from 45Hz to 65Hz Single 5V Supply, Static Power 25mW(typical), Power solution only with Resistor & Capacitor can be adopted. The Low Frequency Output (F1, F2) can drive motor directly; The High Frequency Output (CF) can be used in calibration and data processing. Selectable between the arithmetic sum of the three-phase active energies and the absolute value sum of these energies. Measure positive active power and negative active power.
Published: |