CR6228 Datasheet | SINOPEX

CR6228Tel:852 - 2348 8233 Fax: 852 - 2348 8030 E-mail: sales@sinopex-ent. Current Mode PWM Power Switch Feature z Audio Noise Free Operation z Fixed 50 KHz Switching Frequency z Burst Mode Control For Improved Efficiency and Minimum Standby power Design z Internal Synchronized Slope pensation z Low VDD Startup Current and Low Operating Current z Leading Edge Blanking on Current Sense Input z patible with OB2358 z Pb-Free DIP-8L Package z Good Protection Coverage With Auto Self-Recovery ¾ VDD Over Voltage Clamp and Under Voltage Lockout with Hysteresis (UVLO) ¾ Line Input pensated Cycle-by-Cycle current sense ¾ Overload Protection (OLP) ¾ Over Voltage Protection (OVP) ¾ Over Current Protection (OCP) Applications z AC/DC adaptor z Set-Top Box (STB) Power z Auxiliary Power Supply for PC and Server z VCR, SVR, STB, DVD & DVCD Player SMPS z Digital Cameras and camcorder Adaptor z Open-frame SMPS General Description CR6228 bines a dedicated current mode PWM controller with a high voltage power MOSFET. It is optimized for high performance, low standby power, and cost effective off-line flyback converter applications in sub 27W range. CR6228 offers plete protection coverage with automatic self-recovery feature including Cycle-by-Cycle current limiting (OCP), over load protection (OLP), VDD over voltage clamp and under voltage lockout (UVLO). Excellent EMI performance is achieved with frequency shuffling technique together with soft switching control at he totem pole gate drive output. The tone energy at below 20 KHz is minimized in the design and audio noise is eliminated during operation. CR6228 is offered in DIP-8L package. Output Power Table Product 230VAC ±15% Open Frame1 85-265VAC Open Frame1 CR6228 DIP-8L 27W 16W Notes: 1. Maximum practical continuous power in an open frame design with sufficient drain pattern as a heat sink, at 50℃ ambient. Oct, 2008 V1.0 1/9 CR6228 Pin Assignment ( DIP-8L ) Pin Descriptions Pin Name VDD...