900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






SMC

IS1000M-30 Datasheet Preview

IS1000M-30 Datasheet

Mechanical Style Pressure Switch

No Preview Available !

For details about certified products
conforming to international standards,
visit us at www.smcworld.com.
Mechanical Style Pressure Switch
Series IS1000
Long service life:
5 million cycles
IS1000-01 IS1000-01-X202
Specifications
Model
Fluid
Proof pressure
Max. operating pressure
Regulating pressure range (at OFF point)
Hysteresis
Error of scale
Repeatability
Contacts
Wiring specifications
Fluid
Ambient and fluid temperature
Port size
Weight
Switch Characteristics
IS1000-01
Air/Inert gas
1.0 MPa
0.7 MPa
0.1 to 0.4 MPa
0.08 MPa or less
±0.05 MPa
±0.05 MPa
1a
Grommet, Lead wire length 0.5 m (Standard)
Air
–5 to 60°C (No freezing)
R 1/8
74 g
ZSE„
ISE„
PSE
ZI SE3
PS
ZI SE12
ZSP
ISA2
IS„
ZSM
PF2„
IF„
Max. contact capacity
Voltage
Max. operating current
Impact resistance
Electrical Circuit
Up to 100 VAC/DC
AC 2 VA, 2 W DC
24 VAC/DC or less 48 VAC/DC
50 mA
40 mA
30 G
100 VAC/DC
20 mA
Data
Operating Pressure Range
ON pressure
0.5
OFF pressure
0.4
0.3
0.2
0.1
0
How to Order
0.1 0.2 0.3 0.4
Set pressure scale (MPa)
IS1000 01 S
Port size
01
N01
R 1/8
NPT 1/8
Seal
Nil None
S With seal
Option
X201
Lead wire length 3 m
X202 Regulating pressure range
0.1 to 0.6 MPa
X215
Lead wire length 3 m
Regulating pressure range
0.1 to 0.6 MPa
16-9-1




SMC

IS1000M-30 Datasheet Preview

IS1000M-30 Datasheet

Mechanical Style Pressure Switch

No Preview Available !

Series IS1000
Construction
t
q
w
R 1/8
23
u
y
0.1
0.2
0.3
0.4
i
MPa
!0 IS1000
o
e
r
15
Component Parts
No. Description
q Shield plate
w Switch assembly
e Piston
r PT fittings
t Adjusting screw
y Pointer
u Spring
i Scale plate
o Miniseal Y type
!0 Magnet
Material
Rolled steel plate
Polyacetal
Zinc die-casted
Brass
Brass
Stainless steel 304-WPB
Rigid vinyl chloride
NBR
Rare earth magnet
Precautions
Be sure to read before handling. Refer to pages 16-14-3 and 16-14-4 for Safety Instructions and Common
Precautions on the products mentioned in this catalog, and refer to pages 16-1-11 to 16-1-13 for Precautions on
every series.
Wiring
Warning
1. Connect load before connecting with power
source.
2. In the case of induction load or lead wire ex-
ceeding 5 m long, the following contact protec-
tion box should be used. It may lead to dam-
age to a switch.
Part no.
CD-P11
CD-P12
Voltage Lead wire length
100 VAC Switch side: 0.5 m
24 VDC Load side: 0.5 m
4. How to connect contact protection box
Connect the lead wires from the body and the
contact protective box side indicated
“SWITCH”. Lead wire should be as short as
possible, within 1 m.
5. Dimensions of lead wire
Enclosure: ø 3.4
Insulator: ø 1.1
Conductor: ø 0.64
Mounting/Piping
3. Internal circuit of contact protection box
Surge
absorber
CD-P11
Choke
coil
Brown
Blue
Condenser
CD-P12
Choke
coil
(+) Brown
Warning
1. When changing piping by hand, hold body.
Electrical wire must not be subjected to exces-
sive force.
It may cause a malfunction or damage.
2. Do not drop nor apply excessive force.
It may cause a malfunction or damage.
3. Tighten IS1000-01 applying the spanner on
the PT fitting part.
Resistance
(–) Blue
4. Mounting direction is available in either
horizontal or perpendicular.
Pressure Source
Warning
1. Do not use with corrosive gases or fluids.
2. Never use in an environment where flamma-
ble fluid or gas is used. Since this is not an
explosion-proof construction, it may lead to an
explosive disaster.
3. Avoid use in vacuum applications.
Switch may be imploded.
Pressure Setting
Warning
1. Scale of switching set display is the set value
at the pressure drop.
2. When detecting ON-pressure signal, note that
set pressure on scale plate plus ON-OFF differ-
ential (Hysteresis) will be ON-pressure signal.
3. Pressure display on the scale plate is just as a
reference guide. For an accurate setting,
measure it by pressure gauge.
Operating Environment
Warning
1. Avoid using a switch in a magnetic environ-
ment. It may cause a malfunction.
2. Do not use in such an environment, where
water or oil is splashed. Since it is the open
type construction, if water or oil make an
ingress into the internal parts, the electric
circuit will be corroded and may result in a
malfunction or damage.
3. Avoid vibration. Vibration may cause malfunc-
tion or may cause setting to be incorrect.
16-9-2


Part Number IS1000M-30
Description Mechanical Style Pressure Switch
Maker SMC
Total Page 15 Pages
PDF Download

IS1000M-30 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 IS1000M-3 Mechanical Style Pressure Switch
SMC
2 IS1000M-30 Mechanical Style Pressure Switch
SMC





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy