SK315 Datasheet | SMG

FEATURES - Plastic package has Underwriters Laboratory Flammabiliy Classification 94V-O - For surface mounted applications - High current capacity - Built-in strain relief - Low profile package - Metal to silicon rectifier. majority carrier conduction - High surge capacity - Low power loss, high efficiency - For use in low voltage high frequency inverters, free wheeling, and polarity protection applications - High temperature soldering : 260°C /10 seconds at terminals - Suffix " H " indicated Halogen-free part, ex.SK32AH MECHANICAL DATA Case : Molded plastic, DO-214AC(SMA) Terminals : Solder plated, solderable per MIL-STD-750, method 2026 guaranteed Polarity : Color band denotes cathode end Packaging: 12mm tape per EIA STD RS-481 Weight : 0.002 ounce, 0.064 gram DO-214AC(SMA) Dimensions in inchs and (millimeters) Maximum Ratings and Electrical Characteristics Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60HZ, resistive or inductive load. For capacitive load, derate current by 20%. Marking Code Parameter Symbols Maximum Recerrent Peak Reverse Voltage VRRM Maximum RMS Voltage Maximum DC Blocking Voltage VRMS VDC Maximum Average Forward Rectified Current at TL (See Fig. 1) I(AV) Peak Forward Surge Current, 8.3ms single half-sine-wave IFSM superimposed on rated load (JEDEC method) Maximum Forward Voltage at 3.0A (Note 1) Maximum Reverse Current at Rated DC Blocking Voltage at TA=25 TA=100 Typical Thermal Resistance (Note 2) Operating Junction Temperature Range RθJA RθJL Storage Temperature Range Tstg NOTES:...