900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






SMSC

USB2512I Datasheet Preview

USB2512I Datasheet

USB 2.0 High-Speed 2-Port Hub Controller

No Preview Available !

USB2512i
Industrial Temperature
Rated USB 2.0 High-Speed
2-Port Hub Controller
PRODUCT FEATURES
Datasheet
General Description
The SMSC 2-Port Hub is a low power, OEM
configurable, STT (Single transaction translator) hub
controller IC with 2 downstream ports for embedded
USB solutions. The 2-port hub is fully compliant with the
USB 2.0 Specification and will attach to an upstream
port as a Full-Speed Hub or as a Full-/High-Speed Hub.
The 2-Port Hub supports Low-Speed, Full- Speed, and
High-Speed (if operating as a High-Speed Hub)
downstream devices on all of the enabled downstream
ports.
General Features
„ Hub Controller IC with 2 downstream ports
„
Enhanced OEM configuration options available
through either a single serial I2C EEPROM, or
SMBus Slave Port
„ 36-pin (6x6mm) QFN lead-free, RoHS compliant
package
„ Supports industrial temperature range of -40ºC - 85ºC
Hardware Features
„ Low power operation
„ Full Power Management with individual or ganged
power control of each downstream port
„ On-chip Power On Reset (POR)
„ Internal 1.8V Voltage Regulator
„ Fully integrated USB termination and Pull-up/Pull-
down resistors
„ On Board 24MHz Crystal Driver, Resonator or
External 24MHz clock input
„ Enhanced EMI rejection and ESD protection
performance
OEM Selectable Features
„ Customize Vendor ID, Product ID, and Device ID
„ Select whether the hub is part of a compound device
(When any downstream port is permanently
hardwired to a USB peripheral device, the hub is part
of a compound device)
„ Flexible port mapping and disable sequence. Ports
can be disabled/reordered in any order to support
multiple product SKUs. Hub will automatically reorder
the remaining ports to match the Host controller's
numbering scheme.
„ Programmable USB differential-pair pin location.
Ease PCB layout by aligning USB signal lines directly
to connectors
„ Programmable USB signal drive strength. Recover
USB signal integrity due to compromised system
environment using 2-level driving strength resolution
„ Select the presence of a permanently hardwired USB
peripheral device on a port by port basis
„ Configure the delay time for filtering the over-current
sense inputs
„ Configure the delay time for turning on downstream
port power
„ Indicate the maximum current that the 2-port hub
consumes from the USB upstream port
„ Indicate the maximum current required for the hub
controller
„ Pin Selectable Options for Default Configuration
— Select Downstream Ports as Non-Removable Ports
Applications
„ LCD monitors and TVs
„ Multi-function USB peripherals
„ PC mother boards
„ Set-top boxes, DVD players, DVR/PVR
„ Printers and scanners
„ PC media drive bay
„ Portable hub boxes
„ Mobile PC docking
„ Embedded systems
SMSC USB2512i
DATASHEET
Revision 1.92 (11-28-07)
Free Datasheet http://www.datasheet4u.com/




SMSC

USB2512I Datasheet Preview

USB2512I Datasheet

USB 2.0 High-Speed 2-Port Hub Controller

No Preview Available !

Industrial Temperature Rated USB 2.0 High-Speed 2-Port Hub Controller
Datasheet
ORDER NUMBER(S):
USB2512i-AEZG FOR 36 PIN, QFN LEAD-FREE ROHS COMPLIANT PACKAGE
80 ARKAY DRIVE, HAUPPAUGE, NY 11788 (631) 435-6000, FAX (631) 273-3123
Copyright © 2007 SMSC or its subsidiaries. All rights reserved.
Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for
construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC
reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications
before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent
rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated
version of SMSC's standard Terms of Sale Agreement dated before the date of your order (the "Terms of Sale Agreement"). The product may contain design defects or errors
known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not
designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property
damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of
this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC’s website at http://www.smsc.com. SMSC is a registered
trademark of Standard Microsystems Corporation (“SMSC”). Product names and company names are the trademarks of their respective holders.
SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT AND THE LIKE, AND ANY AND ALL WARRANTIES ARISING FROM ANY COURSE
OF DEALING OR USAGE OF TRADE. IN NO EVENT SHALL SMSC BE LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL
DAMAGES; OR FOR LOST DATA, PROFITS, SAVINGS OR REVENUES OF ANY KIND; REGARDLESS OF THE FORM OF ACTION, WHETHER BASED ON CONTRACT;
TORT; NEGLIGENCE OF SMSC OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR OTHERWISE; WHETHER OR NOT ANY REMEDY OF BUYER IS HELD
TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Revision 1.92 (11-28-07)
2
DATASHEET
SMSC USB2512i
Free Datasheet http://www.datasheet4u.com/


Part Number USB2512I
Description USB 2.0 High-Speed 2-Port Hub Controller
Maker SMSC
PDF Download

USB2512I Datasheet PDF






Similar Datasheet

1 USB2512 USB 2.0 Hi-Speed Hub Controller
SMSC
2 USB2512A USB 2.0 Hi-Speed Hub Controller
SMSC
3 USB2512B USB 2.0 Hi-Speed Hub Controller
SMSC
4 USB2512B USB 2.0 Hi-Speed Hub Controller
Microchip
5 USB2512Bi USB 2.0 Hi-Speed Hub Controller
Microchip
6 USB2512I USB 2.0 High-Speed 2-Port Hub Controller
SMSC





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy