P4KE12A - Axial Lead Transient Voltage Suppressors
SOCAY
Download the P4KE12A datasheet PDF.
This datasheet also covers the P4KE6.8 variant, as both devices belong to the same axial lead transient voltage suppressors family and are provided as variant models within a single manufacturer datasheet.
General Description
The P4KE series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
Key Features
u Glass passivated chip junction in DO-41 Package u Low leakage u Uni and Bidirectional unit u Excellent clamping capability u 400W Peak power capability at 10 × 1000µs waveform Repetition rate
(duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical IR less than 5μA above 12V. u High Temperature soldering: 260°C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% ×
VBR@25°C× ΔT u Plastic package has Underwriters Laboratory Fl.
Full PDF Text Transcription for P4KE12A (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
P4KE12A. For precise diagrams, and layout, please refer to the original PDF.
Axial Lead Transient Voltage Suppressors (TVS) P4KE Series 6.8 To 600 V 400W Description The P4KE series is designed specifically to protect sensitive electronic equipmen...
View more extracted text
ries is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features u Glass passivated chip junction in DO-41 Package u Low leakage u Uni and Bidirectional unit u Excellent clamping capability u 400W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical IR less than 5μA above 12V. u High Temperature soldering: 260°C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.
P4KE12A Datasheet
