SN8P2501BPB Datasheet | SONiX

Description First issue 1.Modify P85 Internal Hihg RC. 2.ADD Brown-Out reset. 1. Modify Topr value. 2. ADD IHRC curve. 1. Modify Brown-Out Reset description 2. Remove power consumption(Pc) 3. Add T0 RTC description 4. Add Fcpu limitation by Noise filter enable. 5. Modify ELECTRICAL CHARACTERISTIC. 1. The Fcpu of IHRC_16M and IHRC_RTC mode is limited to Fosc/4~Fosc/16. 2. Modify IHRC frequency curve in characteristic graphs section. 1. Add Marking Definition. 2. Modify ELECTRICAL CHARACTERISTIC. 1. Modify RST/P1.1/VPP PIN DISCRIPTION. 2. Modify ELECTRICAL CHARACTERISTIC 1. Modify “Chapter 4.3 OSCM REGISTER” STPHX bit description : external high-speed oscillator control bit=> High-speed oscillator control bit. 2. Modify “Chapter 9 INSTRUCTION TABLE”: NOP/PUSH/POP/RETI instructions. 3. Modify “Chapter 2.1.2 CODE OPTION TABLE” code option High_Clk = IHRC_RTC description . 4. Modify “Chapter 2.3.2 STACK REGISTERS” description : 9-bit >> 10-bit data memory. 5. Update “Table of Content” and...