Datasheet4U Logo Datasheet4U.com

SNC573 - Two Channel Direct Drive Speech Controller

Description

I Bit3 ~ Bit0 of Input port 1 I/O Bit3 ~ Bit0 of I/O port 2 I/O Bit3 ~ Bit0 of I/O port 3 P Positive power supply P Negative power supply I Reset pin (active high) O Oscillator / Crystal Out O Positive Output of PWM or DA output O Negative Output of PWM Ver: 1.3 2 August 26, 2003 SNC573 Two Chan

Features

  • Single power supply 2.4V.
  • 5.5V 42 seconds voice capacity are provided(@6KHZ sample rate) Built in a 4-bit tiny controller One 4-bit input port and two 4-bit I/O ports are provided 128.
  • 4 bits RAM are provided 132K.
  • 10 ROM size are provided for voice data and program Maximum 16k program ROM is provided Readable ROM code data IR carrier signal is provided Built in a high quality speech synthesizer Adaptive playing speed from 2.5k-20kHz is provided Two independent voice channels (Cha.

📥 Download Datasheet

Datasheet Details

Part number SNC573
Manufacturer SONiX
File Size 275.71 KB
Description Two Channel Direct Drive Speech Controller
Datasheet download datasheet SNC573 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SNC-VM631 Network Mini Dome Full HD Camera Sony
SNC-VM631 Network Mini Dome Full HD Camera Installation Manual Sony
SNC15016 One Channel Speech Controller SONiX Technology Company
SNC15020 One Channel Speech Controller SONiX Technology Company
SNC15030 One Channel Speech Controller SONiX Technology Company

Other Datasheets by SONiX

Part Number Description
SNC572 Two Channel Direct Drive Speech Controller
SNC578 Two Channel Direct Drive Speech Controller
SNC579 Two Channel Direct Drive Speech Controller
SNC510 One Channel Direct Drive Speech Controller
SNC511 One Channel Direct Drive Speech Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SNC573 Two Channel Direct Drive Speech Controller 1 INTRODUCTION SNC573 is a two-channel voice synthesizer IC with PWM direct drive circuit. It built-in a 4-bit tiny controller with one 4-bit input port and two 4-bit I/O ports. By programming through the tiny controller in SNC573, user’s varied applications including voice section combination, key trigger arrangement, output control, and other logic functions can be easily implemented. 2 FEATURES Single power supply 2.4V – 5.
Published: |