Datasheet4U Logo Datasheet4U.com

S29PL-N - Page-Mode Flash Memory

Description

of Spansion data sheet designations are presented here to highlight their presence and definitions.

The Advance Information designation indicates that Spansion LLC is developing one or more specific products, but has not committed any design to production.

Features

  • 32-Word Write Buffer Dual Chip Enable Inputs (only for S29PL129N).
  • Two CE# inputs control selection of each half of the memory space Single Power Supply Operation.
  • Full Voltage range of 2.7.
  • 3.6 V read, erase, and program operations for battery-powered.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
S29PL-J Page Mode and Simultaneous Read/Write Flash memory device Cypress Semiconductor
S29PL032J Page Mode and Simultaneous Read/Write Flash memory device Cypress Semiconductor
S29PL064J Page Mode and Simultaneous Read/Write Flash memory device Cypress Semiconductor
S29PL127H Multi-chip Products (MCP) Advanced Micro Devices
S29PL127J Page Mode and Simultaneous Read/Write Flash memory device Cypress Semiconductor

Other Datasheets by Spansion (now Infineon)

Part Number Description
S29PL-J Simultaneous-Read/Write Flash Memory
S29PL032J Simultaneous-Read/Write Flash Memory
S29PL064J Simultaneous-Read/Write Flash Memory
S29PL127J Simultaneous-Read/Write Flash Memory
S29PL127N Page-Mode Flash Memory

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com S29PL-N MirrorBit™ Flash Family 29PL256N, S29PL127N, S29PL129N, 256/128/128 Mb (16/8/8 M x 16-Bit) CMOS, 3.0 Volt-only Simultaneous Read/Write, Page-Mode Flash Memory Data Sheet PRELIMINARY Notice to Readers: This document indicates states the current technical specifications regarding the Spansion product(s) described herein. The Preliminary status of this document indicates that a product qualification has been completed, and that initial production has begun. Due to the phases of the manufacturing process that require maintaining efficiency and quality, this document may be revised by subsequent versions or modifications due to changes in technical specifications.
Published: |