Positive voltage regulators
Datasheet - production data
Output current up to 100 mA
Output voltages of 3.3; 5; 6; 8; 9; 10; 12; 15;
18; 24 V thermal overload protection
No external components are required
Available in either ± 4% (A) or ± 8% (C)
The L78L series of three-terminal positive
regulators employ internal current limiting and
thermal shutdown, making them essentially
indestructible. If adequate heat-sink is provided,
they can deliver up to 100 mA output current.
They are intended as fixed voltage regulators in a
wide range of applications including local or on-
card regulation for elimination of noise and
distribution problems associated with single-point
regulation. In addition, they can be used with
power pass elements to make high-current
voltage regulators. The L78L series used as
Zener diode/resistor combination replacement,
offers e improvement along with lower quiescent
current and lower noise.
DocID2145 Rev 26
This is information on a product in full production.