STMicroelectronics ACS108-8SA
The ACS108-8SA belongs to the AC switch range (built with A. This high performance switch can control a load of up to 0.8 A. This device switch includes an overvoltage crowbar structure to absorb the inductive turn-off energy, and a gate level shifter driver to separate the digital controller from the main switch.| Part No. | ACS108-8SA |
|---|---|
| Datasheet | ACS108-8SA Download |
| Manufacturer |  STMicroelectronics |
| Description | overvoltage protected AC switch |
| Buy | Stock & Price |
FEATURES
● Enables equipment to meet IEC 61000-4-5 surge with overvoltage crowbar technology● High noise immunity against static dV/dt and IEC 61000-4-4 burst
● Needs no external protection snubber or varistor
● Reduces component count by up to 80% and Interfaces directly with the micro- controller
● Common package tab connection supports connection of several alternating current switches on the same cooling pad
● VCL gives headroom before clamping then crowbar action
APPLICATIONS
● Alternating current on/off static switching in appliances and industrial control systems● Driving low power high inductive or resistive loads like: – relay, valve, solenoid, dispenser – pump, fan, low power motor, door lock, air flow dumper – lamp
DESCRIPTION
S. D.® technology). It is triggered with a negative gate current flowing out of the gate pin. Note: ®: A.S.D. is a registered trademark of STMicroelectronics Note: TM: ACS is a trademark of STMicroelectronics DS12901 - Rev 1 - February 2019 For further information contact your local STMicroelectronics sales office.
