Datasheet4U Logo Datasheet4U.com

AN2335 - digital output ultracompact linear accelerometer

Description

.

.

.

.

.

.

17 Registers loaded at Bo

Features

  • two independent highly programmable interrupt sources that can be configured either to generate an inertial wake-up interrupt signal when a programmable acceleration threshold is exceeded along one of the three axes or to detect a free-fall event. Two independent pins can be configured to provide interrupt signals to connected devices. The LIS302DL is available in plastic SMD package and it is specified over a temperature range extending from -40°C to +85°C. The ultra small size and weight of th.

📥 Download Datasheet

Datasheet preview – AN2335

Datasheet Details

Part number AN2335
Manufacturer STMicroelectronics
File Size 428.20 KB
Description digital output ultracompact linear accelerometer
Datasheet download datasheet AN2335 Datasheet
Additional preview pages of the AN2335 datasheet.

📁 Similar Datasheet

  • AN231E04 - Dynamically Reconfigurable dpASP (anadigm)
  • AN2352 - I2C USB Bridge Usage (Cypress)
  • AN2356 - Graphics Library (Cypress)
  • AN238 - Tire Pressure Monitoring (TPM) System (Microchip Technology)
  • AN239 - Expanding ADC1 Dyanmic Range (Silicon)
  • AN239 - TV Video IF Combination and Sound IF Combination (Panasonic)
  • AN201 - High-Performance Multiplexing with the DG408 (Vishay Siliconix)
  • AN2010-05 - Isolating Amplifier (Infineon)
  • AN2011S - Correlated Double Sampling IC (Panasonic Semiconductor)
  • AN2018 - Correlated Double Sampling IC (Panasonic Semiconductor)
Other Datasheets by ST Microelectronics

    Full PDF Text Transcription

    Click to expand full text
    www.DataSheet4U.com AN2335 Application note LIS302DL: 3-Axis - ±2g/±8g digital output ultracompact linear accelerometer Introduction This document is intended to give application notes for the low-voltage 3-axis digital output linear MEMS accelerometer provided in LGA package. The LIS302DL is an ultra compact low-power three axes linear accelerometer that includes a sensing element and an IC interface able to take the information from the sensing element and to provide the measured acceleration to the external world through I2C/SPI serial interface. The sensing element, capable of detecting the acceleration, is manufactured using a dedicated process developed by ST to produce inertial sensors and actuators in silicon.
    Published: |