Common mode filter with ESD protection for USB 2.0 and
MIPI D-PHY/MDDI interface
Datasheet - production data
High common mode attenuation:
-34 dB at 900 MHz
-20 dB between 800 MHz and 2.2 GHz
Large bandwidth: 1.7 GHz
Very low PCB space consumption
Thin package: 0.55 mm max.
High reduction of parasitic elements through
Complies with the following standards
IEC 61000-4-2 (exceeds level 4)
±15 kV (air discharge)
±8 kV (contact discharge)
The device is a highly integrated common mode
filter designed to suppress EMI/RFI common
mode noise on high speed differential serial
buses like MIPI D-PHY, MDDI or USB 2.0.
Also it can protect and filter one differential lane.
Figure 1: Pin configuration
DocID17815 Rev 3
This is information on a product in full production.