Datasheet4U Logo Datasheet4U.com

GS1T70-D540F - ISDN DC-DC CONVERTER FRENCH VERSION

General Description

The GS1T70-D540F converter has been designed for the “U” interface of an ISDN-NTBA (Network Termination Basic Access) system with either 4B3T or 2B1Q standard trasmission.

Key Features

  • Wide operating line termination battery voltage Peak input overvoltage withstand: 1kV for 1.2/50µs Peak overvoltage withstand on Output 2 (40V): 250V for 10/700µs Positive or negative input voltage polarity Input and output filtering Short-circuit protection on both outputs Input power during shortcircuit within specification Minimum current drain during stand-by condition: 10µA for Vi.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
GS10000FL 1.0A Surface Mount Glass Passivated Standard Diode SINLOON
GS1000FL SURFACE GENERAL PURPOSE RECTIFIERS Pan Jit International
GS1000FL 1.0A SURFACE MOUNT GLASS PASSIVATED STANDARD DIODE WON-TOP ELECTRONICS
GS1000FL SURFACE MOUNT RECTIFIER UPM
GS1000FL 1.0A General Purpose Rectifier DIOFIT

Other Datasheets by STMicroelectronics

Part Number Description
GS1T70-D540 ISDN DC-DC CONVERTER
GS1T70-D542 ISDN DC-DC CONVERTER
GS1T5-5D15 1 W TRIPLE OUTPUT DC-DC CONVERTER
GS120T48 120W/175W DC-DC CONVERTERS
GS15T48-5 15W DC-DC CONVERTER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
GS1T70-D540F ISDN DC-DC CONVERTER (FRENCH VERSION) Type GS1T70-D540F Vi 25 to 115 V Vo 5V 40 V Io 90 mA 10,5 mA FEATURES Wide operating line termination battery voltage Peak input overvoltage withstand: 1kV for 1.2/50µs Peak overvoltage withstand on Output 2 (40V): 250V for 10/700µs Positive or negative input voltage polarity Input and output filtering Short-circuit protection on both outputs Input power during shortcircuit within specification Minimum current drain during stand-by condition: 10µA for Vi<18V Undervoltage lock out at 10V Input-output isolation voltage: 10 kV pulse 1,2/50 µseconds Output1-output2isolation voltage: 2000VRMS for 60 seconds Mechanical dimensions (L x W x H): 56 mm x 56 mm x 18 mm (2.2” x 2.2” x 0.