Datasheet4U Logo Datasheet4U.com

L6362 Datasheet Fully integrated device transceiver IC

Manufacturer: STMicroelectronics

📥 Download Datasheet

General Description

The L6362 is a monolithic dual push pull Transceiver fully compliant to PHY2 (3 wires) supporting COM1 (4.8 kbaud), COM2 (38.4 kbaud) and COM3 (230.4 kbaud) modes.

C/Q and I/Q output stages are programmable: high-side, low-side or push-pull;

also cut-off current and cutoff current delay time are programmable.

Overview

L6362 Fully integrated device transceiver IC Data brief.

Key Features

  • Supply voltage from 8 V to 32.5 V 2 programmable output stages: high-side, lowside or push-pull (< 4 Ω @125 °C) Up to 230 kHz communication speed 2 industrial digital inputs, type 1 compliant and programmable filter Short-circuit and overcurrent outputs protection through current limitation and programmable cut-off current Overvoltage protection (>36 V) 3.3 V/5 V selectable 50 mA linear regulator (with maximum power dissipation = 200 mW) On chip high efficiency adj.

More Datasheets from STMicroelectronics

Part Number Description
L6362A IO-Link communication transceiver
L6360 IO-Link communication master transceiver
L6364 Dual-channel transceiver
L6316 4-CHANNEL LOW POWER PREAMPLIFIER
L6370Q 2.5 A single high-side smart power switch
L6382D5 Power management unit
L6384 HIGH-VOLTAGE HALF BRIDGE DRIVER
L6384E High voltage half-bridge driver
L6385 HIGH-VOLTAGE HIGH AND LOW SIDE DRIVER
L6385E High voltage high and low-side driver