Datasheet4U Logo Datasheet4U.com

L6599 - High-voltage resonant controller

Datasheet Summary

Description

.

.

.

.

.

.

.

.

Features

  • 50 % duty cycle, variable frequency control of resonant half-bridge.
  • High-accuracy oscillator.
  • Up to 500 kHz operating frequency.
  • Two-level OCP: frequency-shift and latched shutdown.
  • Interface with PFC controller.
  • Latched disable input.
  • Burst-mode operation at light load.
  • Input for power-ON/OFF sequencing or brownout protection.
  • Non-linear soft-start for monotonic output voltage rise.
  • 600 V-rail compatible high-side gate driver with integrated.

📥 Download Datasheet

Datasheet preview – L6599

Datasheet Details

Part number L6599
Manufacturer STMicroelectronics
File Size 610.34 KB
Description High-voltage resonant controller
Datasheet download datasheet L6599 Datasheet
Additional preview pages of the L6599 datasheet.

📁 Similar Datasheet

  • L6563 - Advanced transition-mode PFC controller (ST Microelectronics)
  • L6563A - Advanced transition-mode PFC controller (ST Microelectronics)
  • L6563H - High voltage start-up transition-mode PFC (ST Microelectronics)
  • L6570A - 2-CHANNEL FLOPPY DISK READ/WRITE CIRCUITS (ST Microelectronics)
  • L6570B - 2-CHANNEL FLOPPY DISK READ/WRITE CIRCUITS (ST Microelectronics)
  • L6585D - PFC and Ballast Controller (ST Microelectronics)
Other Datasheets by STMicroelectronics
  • L6599A - Improved high-voltage resonant controller
  • L6599AF - high voltage resonant controller
  • L6599AT - Improved high-voltage resonant controller
  • L6590 - FULLY INTEGRATED POWER SUPPLY
  • L6590A - FULLY INTEGRATED POWER SUPPLY
  • L6591 - PWM controller
  • L6598 - High voltage resonant controller
  • L6560 - POWER FACTOR CORRECTOR

Full PDF Text Transcription

Click to expand full text
L6599 High-voltage resonant controller Not for new design Features ■ 50 % duty cycle, variable frequency control of resonant half-bridge ■ High-accuracy oscillator ■ Up to 500 kHz operating frequency ■ Two-level OCP: frequency-shift and latched shutdown ■ Interface with PFC controller ■ Latched disable input ■ Burst-mode operation at light load ■ Input for power-ON/OFF sequencing or brownout protection ■ Non-linear soft-start for monotonic output voltage rise ■ 600 V-rail compatible high-side gate driver with integrated bootstrap diode and high dV/dt immunity ■ -300/800 mA high-side and low-side gate drivers with UVLO pull-down ■ DIP-16, SO-16N packages Figure 1. Block diagram DIP-16 SO-16N Table 1.
Published: |