Datasheet Details
| Part number | L9654 |
|---|---|
| Manufacturer | STMicroelectronics |
| File Size | 2.03 MB |
| Description | Quad squib driver and dual sensor interface ASIC |
| Download | L9654 Download (PDF) |
|
|
|
| Part number | L9654 |
|---|---|
| Manufacturer | STMicroelectronics |
| File Size | 2.03 MB |
| Description | Quad squib driver and dual sensor interface ASIC |
| Download | L9654 Download (PDF) |
|
|
|
Squib short to ground, short to battery and MOS diagnostic available on SPI register L9654 is intended to deploy up to 4 squibs and to interface up to 2 satellites.
Capability to deploy the squib with 1.2 A (min.) or 1.75 A under 35 V load-dump condition and the low-side MOS is shorted to ground Capability to deploy the squib with 1.2 A (min.) at 6.9 V VRES and 1.75 A at 12 V VRES.
Interface with 2 satellite sensors Programmable independent current trip points for each satellite channel Squib drivers are sized to deploy 1.2 A (min.) for 2 ms (min.) during load dump and 1.75 A (min.) for 1 ms (min.) during load dump.
L9654 Quad squib driver and dual sensor interface ASIC for safety application Datasheet - production data Support Manchester protocol for satellite sensors Supports for variable bit rate detection Independent current limit and fault timer shutdown protection for each satellite output *$3*36 LQFP48 Short to ground and short to battery detection and reporting for each satellite channel 5.
| Part Number | Description |
|---|---|
| L9658 | Octal squib driver and quad sensor interface ASIC |
| L9659 | Octal squib driver ASIC |
| L9637 | Monolithic bus driver |
| L9637D | Monolithic bus driver |
| L9660 | Quad squib driver ASIC |
| L9662 | Octal squib driver and quad Manchester/PSI5 encoded sensor interface ASIC |
| L9663 | Automotive PSI5 Transceiver IC |
| L9678P | Automotive user configurable airbag and battery cut-off-IC |
| L9678P-S | Automotive user configurable airbag and battery cut-off-IC |
| L9679E | Automotive battery cut-off circuit and airbag system |