Datasheet4U Logo Datasheet4U.com

L9659 Datasheet Octal Squib Driver Asic

Manufacturer: STMicroelectronics

Overview: L9659 Octal squib driver ASIC for safety application.

General Description

The L9659 is intended to deploy up to 8 squibs.

Squib drivers are sized to deploy 1.2 A minimum for 2 ms, 1.75 A minimum for 1 ms and 1.75 A minimum for 0.65 ms during load dump along with 1.5 A minimum for 2 ms for VRES voltages less than 25 V.

Full diagnostic capabilities of the squib interface are provided.

Key Features

  • 8 deployment drivers with SPI selectable firing current and times.
  • Capability to deploy the squib with 1.2 A (min)/2 ms, 1.75 A (min)/1.0 ms and 1.75 A (min)/0.65 ms between VRES of 7 V to 37 V.
  • Capability to deploy the squib with 1.5 A (min)/2 ms between VRES of 7 V to 25 V.
  • Firing capability to deploy all channels simultaneously.
  • Independently controlled high-side and lowside MOS for diagnosis.
  • Analog output available for resistance measurement.
  • Squib short.

More Datasheets from STMicroelectronics

Part Number Description
L9654 Quad squib driver and dual sensor interface ASIC
L9658 Octal squib driver and quad sensor interface ASIC
L9637 Monolithic bus driver
L9637D Monolithic bus driver
L9660 Quad squib driver ASIC
L9662 Octal squib driver and quad Manchester/PSI5 encoded sensor interface ASIC
L9663 Automotive PSI5 Transceiver IC
L9678P Automotive user configurable airbag and battery cut-off-IC
L9678P-S Automotive user configurable airbag and battery cut-off-IC
L9679E Automotive battery cut-off circuit and airbag system

L9659 Distributor