STMicroelectronics L99MOD53XP
The L99MOD53XP is a microcontroller-driven multifunctional actuator driver for automotive applications. The integrated SPI controls all operating modes (forward, reverse, brake and high impedance).| Part No. | L99MOD53XP |
|---|---|
| Datasheet | L99MOD53XP Download |
| Manufacturer |  STMicroelectronics |
| Description | Multi-output driver |
| Buy | Stock & Price |
APPLICATIONS
PowerSSO-36FEATURES
L99MOD devices are recommended for those applications that need multiple motors control with additional loads in high-side configuration, such as bulbs/LEDs or requiring protected supply, like sensors or cameras.● AEC-Q100 qualified
● Three half bridges for 0.75 A loads (RDSon=1600 mΩ
● Two configurable high-side drivers for up to 1.5 A load (RDSon=500 mΩor0.35 A load (RDSon=1800 mΩ)
● One full bridge for 6 A load (RDSon =150 mΩ)
● One high-side driver for 6 A load (RDSon =100 mΩ)
● Programmable soft start function to drive loads with higher inrush currents (i.e. current >6 A, >1.5 A)
DESCRIPTION
Up to three DC motors and three grounded resistive loads can be driven with five half bridges and three high-side drivers. Also all diagnostic information is available via SPI read.● Very low current consumption in standby mode (IS < 6 µA typ; Tj 85 °C)
● All outputs short circuit protected
● Current monitor output for high-side OUT1, OUT4, OUT5 and OUT8
● All outputs over temperature protected
● Open-load diagnostic for all outputs Table 1.
