STMicroelectronics LEOLVDSRD
Rad-hard plastic LVDS driver-receiver
| Part No. | LEOLVDSRD |
|---|---|
| Datasheet | LEOLVDSRD Download |
| Manufacturer |  STMicroelectronics |
| Description | Rad-hard plastic LVDS driver-receiver |
| Buy | Stock & Price |
FEATURES
● LVDS single driver and single receiver● 400 Mbps (200 MHz)
● 3 V to 3.6 V operating power supply
● 4.8 V absolute maximum ratings
● Individual enable/disable function with high impedance
● Cold spare on all pins
● Fail-safe function
● RML < 1% and CVCM <0.1% guaranteed outgassing
● Nickel/palladium/gold-lead-finished (NiPdAu), whisker-free
● Gold wires
● 50 krad (Si) total ionizing dose
● SEL-free up to 62.5 MeV.cm²/mg
● Mass: 80 mg
● Compliant with ST-LEO-specification
APPLICATIONS
● Low earth orbit (LEO) satellites, high speed interface systemsDESCRIPTION
The LEOLVDSRD is a 3 V to 3.6 V power supply (4.8 V absolute maximum ratings) low voltage differential signaling (LVDS) driver and receiver qualified for use in aerospace environments. It operates over a controlled impedance of 100 ohm transmission media that may be printed circuit board traces, back planes, or cables. The circuit features an internal fail-safe function to ensure a known state in case of an input short-circuit or floating input.
