Datasheet4U Logo Datasheet4U.com

LM111 - Voltage comparator

Description

The LM111, LM211, LM311 are voltage comparators that have low input currents.

They are also designed to operate over a wide range of supply voltages: from standard ±15V operational amplifier supplies down to the single +5V supply used for IC logic.

Features

  • Maximum input current: 150nA.
  • Maximum offset current: 20nA.
  • Differential input voltage range: ±30V.
  • Power consumption:135mW at ±15V.
  • Supply voltage: +5V to ±15V.
  • Output current: 50mA.

📥 Download Datasheet

📁 Similar Datasheet

  • LM111 - Voltage Comparator (National Semiconductor)
  • LM111 - Voltage Comparators (Fairchild Semiconductor)
  • LM111 - Differential Comparators (Texas Instruments)
  • LM111 - Voltage Comparator (Linear Technology)
  • LM111-N - Voltage Comparator (Texas Instruments)
  • LM1112 - Dolby B-Type Noise Reduction Processor (National Semiconductor)
  • LM1112A - Dolby B-Type Noise Reduction Processor (National Semiconductor)
  • LM1112B - Dolby B-Type Noise Reduction Processor (National Semiconductor)
  • LM1112C - Dolby B-Type Noise Reduction Processor (National Semiconductor)
  • LM1114 - Low Dropout CMOS Voltage Regulators (Cystech Electonics)
Other Datasheets by STMicroelectronics
  • LM117 - 1.2V TO 37V VOLTAGE REGULATOR
  • LM119 - HIGH SPEED DUAL COMPARATORS
  • LM101A - SINGLE OPERATIONAL AMPLIFIER
  • LM123 - THREE-TERMINAL 3A-5V POSITIVE VOLTAGE REGULATORS
  • LM124 - Low-power quad operational amplifiers
  • LM124A - Low-power quad operational amplifiers
  • LM124DT - Low-power quad operational amplifier
  • LM124W - Low Power Quad Operational Amplifiers

Full PDF Text Transcription

Click to expand full text
LM111-LM211-LM311 Voltage comparator with strobe Features ■ Maximum input current: 150nA ■ Maximum offset current: 20nA ■ Differential input voltage range: ±30V ■ Power consumption:135mW at ±15V ■ Supply voltage: +5V to ±15V ■ Output current: 50mA Description The LM111, LM211, LM311 are voltage comparators that have low input currents. They are also designed to operate over a wide range of supply voltages: from standard ±15V operational amplifier supplies down to the single +5V supply used for IC logic. Their output is compatible with RTL-DTL and TTL as well as MOS circuits and can switch voltages up to +50V at output currents as high as 50mA.
Published: |