LM193W Datasheet | STMicroelectronics

Features - Wide single supply voltage range or dual supplies: +2 V to +36 V or ±1 V to ±18 V - Very low supply current (0.4 m A) independent of supply voltage (1 m W/parator at +5 V) - Low input bias current: 25 n A typ - Low input offset current: ±5 n A typ - Low input offset voltage: ±1 m V typ - Input mon-mode voltage range includes ground - Low output saturation voltage: 250 m V typ. (Io = 4 m A) - Differential input voltage range equal to the supply voltage - TTL, DTL, ECL, MOS, CMOS patible outputs - ESD internal protection: 2 k V Description These devices consist of two independent low voltage parators designed specifically to operate from a single supply over a wide range of voltages. Operation from split power supplies is also possible. These parators also have a unique characteristic in that the input mon-mode voltage range includes ground even though operated from a single power supply voltage. All the pins are protected against electrostatic discharge up to 2 k V. As a consequence, the input voltages must not exceed the magnitude of VCC+ or VCC-. DIP8 (Plastic package) SO8 (Plastic micropackage) TSSOP8 (Thin shrink small outline package) Pin connections (Top view) - Output 1 2 - Inverting input 1 3 - Non-inverting input 1 4 - VCC5 - Non-inverting input 2 6 - Inverting input 2 7 - Output 2 8 - VCC+ December 2008 Rev 2 1/15 .st. Schematic diagram Schematic diagram LM193W, LM293W, LM393W Figure 1. Circuit schematic (1/2 LM193W) VCC+ 3.5µA...