M24C16-RDW6TP Datasheet | STMicroelectronics

Features - patible with following I2C bus modes: - 400 k Hz - 100 k Hz - Memory array: - 16 Kbit (2 Kbyte) of EEPROM - Page size: 16 byte - Single supply voltage: - M24C16-W: 2.5 V to 5.5 V - M24C16-R: 1.8 V to 5.5 V - M24C16-F: 1.7 V to 5.5 V (full temperature range) and 1.6 V to 1.7 V (limited temperature range) - Write time: - Byte write within 5 ms - Page write within 5 ms - Operating temperature range: - from -40 °C up to +85 °C - Random and sequential read modes - Write protect of the whole memory array - Enhanced ESD/latch-up protection - More than 4 million Write cycles - More than 200-year data retention Packages - SO8 ECOPACK2 - TSSOP8 ECOPACK2 - UFDFPN8 ECOPACK2 - UFDFPN5 ECOPACK2 - Unsawn wafer (each die is tested) DS9194 - Rev 11 - October 2020 For further information contact your local STMicroelectronics sales office. .st. M24C16-W M24C16-R M24C16-F Description Description The M24C16 is a 16-Kbit I2C-patible EEPROM (electrically erasable programmable memory) organized as 2K x 8 bits. The M24C16-W can be accessed (Read and Write) with a supply voltage from 2.5 V to 5.5 V, the M24C16-R can be accessed (Read and Write) with a supply voltage from 1.8 V to 5.5 V, and the M24C16-F can be accessed with a supply voltage from 1.7 V to 5.5 V (over the full temperature range) or with an extended supply voltage from 1.6 V to 1.7 V. The M24C16-F can also operate down to 1.6 V, under some restricting conditions. All these devices operate with a clock frequency of 400 k Hz (or lower). Figure 1. Logic diagram M24xxx...