Datasheet4U Logo Datasheet4U.com

M24LR64E-R - Dynamic NFC/RFID tag

Description

.

.

.

.

.

.

.

Features

  • Belonging to ST25 family, which includes all NFC/RF ID tag and reader products from ST I2C interface.
  • Two-wires I2C serial interface supports 400 kHz protocol.
  • Single supply voltage:.
  • 1.8 V to 5.5 V.
  • Byte and Page Write (up to 4 bytes).
  • Random and Sequential read modes.
  • Self-timed programming cycle.
  • Automatic address incrementing.
  • Enhanced ESD/latch-up protection.
  • I²C timeout Contactless interface.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
M24L16161DA 16-Mbit (1M x 16) Pseudo Static RAM Elite Semiconductor Memory Technology
M24L16161ZA 16-Mbit (1M x 16) Pseudo Static RAM Elite Semiconductor Memory Technology
M24L216128DA 2-Mbit (128K x 16) Pseudo Static RAM Elite Semiconductor Memory Technology
M24L216128SA 2-Mbit (128K x 16) Pseudo Static RAM Elite Semiconductor Memory Technology
M24L28256DA 2-Mbit (256K x 8) Pseudo Static RAM Elite Semiconductor Memory Technology

Other Datasheets by STMicroelectronics

Part Number Description
M24LR64-R Dynamic NFC/RFID tag-IC
M24128 128-Kbit serial I2C bus EEPROM
M24128-125 Automotive 128-Kbit serial I2C bus EEPROM
M24128-A125 Automotive 128-Kbit serial I2C bus EEPROM
M24128-B 256/128 Kbit Serial IC Bus EEPROM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
M24LR64E-R Dynamic NFC/RFID tag IC with 64-Kbit EEPROM, energy harvesting, I²C bus and ISO 15693 RF interface Datasheet - production data SO8 (MN) UFDFPN8 (MC) TSSOP8 (DW) 2 x 3 mm in low (6.6 kbit/s) or high (26 kbit/s) data rate mode. Supports the 53 kbit/s data rate with Fast commands • Internal tuning capacitance: 27.5 pF • 64-bit unique identifier (UID) • Read Block & Write (32-bit blocks) Digital output pin • User configurable pin: RF write in progress or RF busy mode Wafer (RUW20) Wafer (SB12I) Features • Belonging to ST25 family, which includes all NFC/RF ID tag and reader products from ST I2C interface • Two-wires I2C serial interface supports 400 kHz protocol • Single supply voltage: – 1.8 V to 5.
Published: |