M74HCT4052 Datasheet | STMicroelectronics

DUAL 4-CHANNEL ANALOG MULTIPLEXER/DEMULTIPLEXER s LOW POWER DISSIPATION: ICC = 4µA (MAX.) at TA=25°C s LOGIC LEVEL TRANSLATION TO ENABLE TTL LOGIC SIGNAL TO MUNICATE WITH ±5V ANALOG SIGNAL ) s LOW "ON" RESISTANCE: t(s 70Ω TYP. (VCC - VEE = 4.5V) 50Ω TYP. (VCC - VEE = 9V) c s WIDE ANALOG INPUT VOLTAGE RANGE: du ±6V ro ) s FAST SWITCHING: P t(s tpd = 13ns (TYP.) at TA = 25 °C s LOW CROSSTALK BETWEEN SWITCHES lete uc s HIGH ON/OFF OUTPUT VOLTAGE RATIO d s WIDE OPERATING SUPPLY VOLTAGE so ro RANGE (VCC - VEE) = 2V TO 12V b P s LOW SINE WAVE DISTORTION: 0.02% at VCC - VEE = 9V - O te s PATIBLE WITH TTL OUTPUTS: ) le VIH = 2V(MIN.) VIL = 0.8V (MAX.) t(s o s PIN AND FUNCTION PATIBLE WITH s 74 SERIES 4052 duc Ob DESCRIPTION ro ) - The M74HCT4052 is a dual four-channel analog P t(s MULTIPLEXER/DEMULTIPLEXER fabricated with silicon gate C2MOS technology and it is pin te c to pin patible with the equivalent metal gate le u CMOS4000B series. o d It contains 8 bidirectional and digitally controlled s ro analog switches. OObbsolete P PIN CONNECTION AND IEC LOGIC SYMBOLS TSSOP ORDER CODES PACKAGE TUBE T&R DIP SOP TSSOP M74HCT4052B1R M74HCT4052M1R M74HCT4052RM13TR M74HCT4052TTR A built-in level shifting is included to allow an input range up to ±6V (peak) for an analog signal with digital control signal of 0 to 6V. VEE supply pin is provided for analog input signals. It has an inhibit (INH) input terminal to disable all the switches when high, patible with TTL output level. For operation as a digital multiplexer/demultiplexer, VEE is connected to GND. A and B control inputs (TTL patible) select one channel out of four in each section. All inputs are equipped with protection circuits against static discharge and transient excess voltage. March 2003 1/14 CONTROL INPUT EQUIVALENT CIRCUIT PIN DESCRIPTION PIN No SYMBOL NAME AND FUNCTION 1, 5, 2,...