SG2525A Datasheet | STMicroelectronics

DESCRIPTION The SG3525A series of pulse width modulator integrated circuits are designed to offer improved performance and lowered external parts count when used in designing all types of switching power supplies. The on-chip + 5.1 V reference is trimmed to ± 1 % and the input mon-mode range of the error amplifier includes the reference voltage eliminating external resistors. A sync input to the oscillator allows multiple units to be slaved or a single unit to be synchronized to an external system clock. A single resistor between the CT and the discharge terminals provide a wide range of dead time ad- justment. These devices also feature built-in soft-start circuitry with only an external timing capacitor required. A shutdown terminal controls both the soft-start circuity and the output stages, providing instantaneous turn off through the PWM latch with pulsed shutdown, as well as soft-start recycle with longer shutdown mands. These functions are also controlled by an undervoltage lockout which keeps the outputs off and the soft-start capacitor discharged for sub-normal input voltages. This lockout circuitry includes approximately 500 m V of hysteresis for jitterfree operation. Another feature of these PWM circuits is a latch following the parator. Once a PWM pulses has been terminated for any reason, the outputs will remain off for the duration of the period. The latch is reset with each clock pulse. The output stages are totem-pole designs capable of sourcing or sinking in excess of 200 m A. The SG3525A output stage features NOR logic, giving a LOW output for an OFF state. PIN CONNECTIONS AND ORDERING NUMBERS (top view) Type SG2525A SG3525A Plastic DIP SG2525AN SG3525AN SO16 SG2525AP SG3525AP June 2000 1/12 SG2525A-SG3525A ABSOLUTE MAXIMUM RATINGS Symbol Vi VC IOSC Io IR IT Ptot Tj Tstg Top Parameter Supply Voltage Collector Supply Voltage Oscillator Charging Current Output Current, Source or Sink Reference Output Current Current through CT Terminal...